The AnalyticalModel type exposes the following members.
Methods
Name | Description | |
---|---|---|
Approximate |
Switches between non-approximated (e.g., Curved) Analytical Models
and approximated (made up of lines only) Analytical Models
|
|
ArePhasesModifiable |
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from
Element
.)
|
|
CanApproximate |
Indicates if Analytical Model can be approximated or not.
|
|
CanBeHidden |
Indicates if the element can be hidden in the view.
(Inherited from
Element
.)
|
|
CanBeLocked |
Identifies if the element can be locked.
(Inherited from
Element
.)
|
|
CanDisableAutoDetect |
Indicates if Analytical Auto-detect can be disabled programmatically
|
|
CanHaveAnalyticalModel |
Indicates whether the Element can have an Analytical Model.
(Inherited from
Element
.)
|
|
CanHaveRigidLinks |
Indicates if Analytical Model supports Rigid Links.
|
|
CanHaveTypeAssigned |
Identifies if the element can have a type assigned.
(Inherited from
Element
.)
|
|
CanUseHardPoints |
Indicates if Analytical Model can use Hard Points.
|
|
ChangeTypeId(ElementId) |
Changes the type of the element.
(Inherited from
Element
.)
|
|
CloneAdjustment |
The method clones the adjustment of one end of the AM on another AM,
with respect to the one of the ends.
One of the Analytical Model ends
|
|
DeleteEntity |
Deletes the existing entity created by %schema% in the element
(Inherited from
Element
.)
|
|
Disconnect |
Unjoin from Hub Element.
|
|
Dispose | (Inherited from Element .) | |
Enable |
Enables or disables Analytical Model, if the Element allows a one-operation Analytical Model toggle.
|
|
EnableAutoDetect |
Enable or disable Analytical Auto-detect.
|
|
Equals | (Inherited from Object .) | |
GetAnalyticalModel |
Retrieves writeable Analytical Model for Element.
(Inherited from
Element
.)
|
|
GetAnalyticalModelId |
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from
Element
.)
|
|
GetAnalyticalModelSketchComponents |
Retrieves a collection of AnalyticalModelSketchComponent objects, which are useful for those Analytical Models
that have finer calibration below the Element level.
|
|
GetAnalyticalModelSupports |
Retrieves the AnalyticalModelSupport array, which is useful to extract Analytical
Support Information from Elements.
|
|
GetAnalyzeAs |
Returns value of Analyze As parameter for Analytical Model.
|
|
GetApproximationDeviation |
Retrieves amount by which approximation is made.
|
|
GetAutoDetectMatchedElements |
Retrieves other Element Ids that this Element is Auto-detecting against.
|
|
GetCurve |
Returns the single curve of the Analytical Model, if it is only one curve.
|
|
GetCurves |
Retrieves all curves for the Analytical Model of a given type.
|
|
GetElementId |
Retrieves Element Id of the structural element corresponding to the Analytical Model.
|
|
GetEntity |
Returns the existing entity corresponding to the Schema if it has been saved in the
Element, or an invalid entity otherwise.
(Inherited from
Element
.)
|
|
GetEntitySchemaGuids |
Returns the Schema guids of any Entities stored in this element.
(Inherited from
Element
.)
|
|
GetExternalFileReference |
Gets information pertaining to the external file referenced
by the element.
(Inherited from
Element
.)
|
|
GetExternalResourceReference |
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from
Element
.)
|
|
GetExternalResourceReferences |
Gets the full map of the external resource references referenced
by the element.
(Inherited from
Element
.)
|
|
GetGeneratingElementIds |
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from
Element
.)
|
|
GetGeometryObjectFromReference |
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from
Element
.)
|
|
GetHashCode |
Serves as a hash function for a particular type.
(Inherited from
Object
.)
|
|
GetLocalCoordinateSystem |
Gets the local coordinate system (LCS) for an analytical model element.
|
|
GetManualAdjustmentMatchedElements |
Retrieves other Element Ids against which the Analytical Model has been adjusted.
|
|
GetMaterialArea |
Gets the area of the material with the given id.
(Inherited from
Element
.)
|
|
GetMaterialIds |
Gets the element ids of all materials present in the element.
(Inherited from
Element
.)
|
|
GetMaterialVolume |
Gets the volume of the material with the given id.
(Inherited from
Element
.)
|
|
GetMonitoredLinkElementIds |
Provides the link instance IDs when the element is monitoring.
(Inherited from
Element
.)
|
|
GetMonitoredLocalElementIds |
Provides the local element IDs when the element is monitoring.
(Inherited from
Element
.)
|
|
GetOffset |
Gets the offset of the analytical model at end.
|
|
GetOrderedParameters |
Gets the parameters associated to the element in order.
(Inherited from
Element
.)
|
|
GetParameterFormatOptions |
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from
Element
.)
|
|
GetParameters |
Retrieves the parameters from the element via the given name.
(Inherited from
Element
.)
|
|
GetPhaseStatus |
Gets the status of a given element in the input phase
(Inherited from
Element
.)
|
|
GetPoint |
Retrieves point of the Analytical Model.
|
|
GetReference |
Returns a reference to a given curve within the analytical model.
|
|
GetRigidLink |
Returns rigid link curve corresponding to selector.
|
|
GetType |
Gets the
Type
of the current instance.
(Inherited from
Object
.)
|
|
GetTypeId |
Returns the identifier of this element's type.
(Inherited from
Element
.)
|
|
GetValidTypes |
Obtains a set of types that are valid for this element.
(Inherited from
Element
.)
|
|
HasDeletedLinks |
Indicates if Analytical Model contains deleted Analytical Links.
|
|
HasPhases |
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from
Element
.)
|
|
HasRigidLinksWith |
Indicates if Analytical Model has Rigid Links with specified element.
|
|
IsAnalyzeAsValid |
Determines if the given Analyze As parameter is valid for this Element.
|
|
IsApproximated |
Indicates if Analytical Model is approximated or not.
|
|
IsAutoDetectEnabled |
Reports if Analytical Auto-detect for the given direction is enabled.
|
|
IsElementFullySupported |
Indicates if Analytical Model is fully supported.
|
|
IsEnabled |
Reports whether the Analytical Model is enabled or disabled.
|
|
IsExternalFileReference |
Determines whether this Element represents an external
file.
(Inherited from
Element
.)
|
|
IsHidden |
Identifies if the element has been permanently hidden in the view.
(Inherited from
Element
.)
|
|
IsManuallyAdjusted |
Indicates if the Analytical Model has been manually adjusted by the user.
|
|
IsModified |
Checks if AM has been adjusted from auto-detect at any end.
|
|
IsMonitoringLinkElement |
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from
Element
.)
|
|
IsMonitoringLocalElement |
Indicate whether an element is monitoring other local elements.
(Inherited from
Element
.)
|
|
IsPhaseCreatedValid |
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from
Element
.)
|
|
IsPhaseDemolishedValid |
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from
Element
.)
|
|
IsSingleCurve |
Indicates if the Analytical Model can be expressed as a single curve.
|
|
IsSinglePoint |
Indicates if the Analytical Model can be expressed as a single point.
|
|
IsValidDirectionForAutoDetect |
Tests if the supplied direction is valid for Analytical Auto-detect.
|
|
IsValidForManualAdjustment |
Indicates if the identified reference is acceptable for Manual Analytical Adjustment.
|
|
IsValidManualAdjustmentSource |
Indicates if the identified reference is acceptable as a source for Manual Analytical Adjustment.
|
|
IsValidManualAdjustmentTarget |
Indicates if reference is acceptable as a "Target" for Manual Analytical Adjustment.
|
|
IsValidRigidLinksOption |
Indicates if Rigid Links option is valid for the Analytical Model.
|
|
IsValidSelector |
Indicates if the input selector is valid for the Analytical Model.
|
|
IsValidType(ElementId) |
Checks if given type is valid for this element.
(Inherited from
Element
.)
|
|
LookupParameter |
Attempts to find a parameter on the element which has the given name.
(Inherited from
Element
.)
|
|
ManuallyAdjust |
Perform Manual Analytical Adjustment on analytical model, with respect to another Element
|
|
RefersToExternalResourceReference |
Determines whether this Element uses external resources associated with
a specified external resource type.
(Inherited from
Element
.)
|
|
RefersToExternalResourceReferences |
Determines whether this Element uses external resources.
(Inherited from
Element
.)
|
|
ResetLinks |
The function is trying to recreate analytical link elements that were deleted by the user.
|
|
ResetManualAdjustment |
Resets all manual adjustments performed by the user onto the Analytical Model.
|
|
SetAnalyzeAs |
Sets value of Analyze As parameter for this Element.
|
|
SetApproximationDeviation |
Adjusts the amount by which approximation is made.
|
|
SetEntity |
Stores the entity in the element. If an Entity described by the same Schema already
exists, it is overwritten.
(Inherited from
Element
.)
|
|
SetOffset |
Sets the offset of the analytical model at end.
|
|
SetUsesHardPoints |
Sets Hard Points for the Analytical Model.
|
|
SupportsManualAdjustment |
Indicates if the Element supports Manual Analytical Adjustment.
|
|
ToString |
Returns a string that represents the current object.
(Inherited from
Object
.)
|
|
UsesHardPoints |
Indicates if the Analytical Model is using Hard Points during approximation.
|
Properties
Name | Description | |
---|---|---|
AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from
Element
.)
|
|
BoundingBox |
Retrieves a box that circumscribes all geometry of the element.
(Inherited from
Element
.)
|
|
Category |
Retrieves a Category object that represents the category or sub category in which the
element resides.
(Inherited from
Element
.)
|
|
CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from
Element
.)
|
|
DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from
Element
.)
|
|
DesignOption |
Returns the design option to which the element belongs.
(Inherited from
Element
.)
|
|
Document |
Returns the Document in which the Element resides.
(Inherited from
Element
.)
|
|
Geometry |
Retrieves the geometric representation of the element.
(Inherited from
Element
.)
|
|
GroupId |
The id of the group to which an element belongs.
(Inherited from
Element
.)
|
|
Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from
Element
.)
|
|
IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from
Element
.)
|
|
LevelId |
The id of the level associated with the element.
(Inherited from
Element
.)
|
|
Location |
This property is used to find the physical location of an element within a project.
(Inherited from
Element
.)
|
|
Name |
A human readable name for the Element.
(Inherited from
Element
.)
|
|
OwnerViewId |
The id of the view that owns the element.
(Inherited from
Element
.)
|
|
Parameter Guid |
Retrieves a parameter from the element given a GUID for a shared parameter.
(Inherited from
Element
.)
|
|
Parameter BuiltInParameter |
Retrieves a parameter from the element given a parameter id.
(Inherited from
Element
.)
|
|
Parameter Definition |
Retrieves a parameter from the element based on its definition.
(Inherited from
Element
.)
|
|
Parameters |
Retrieves a set containing all of the parameters that are contained within the element.
(Inherited from
Element
.)
|
|
ParametersMap |
Retrieves a map containing all of the parameters that are contained within the element.
(Inherited from
Element
.)
|
|
Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from
Element
.)
|
|
RigidLinksOption |
Indicates if parameters indicate if Rigid Links should be formed.
|
|
UniqueId |
A stable unique identifier for an element within the document.
(Inherited from
Element
.)
|
|
ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from
Element
.)
|
|
WorksetId |
Get Id of the Workset which owns the element.
(Inherited from
Element
.)
|