The WallSweepInfo type exposes the following members.
Properties
Name | Description | |
---|---|---|
CutsWall |
Indicates if you want the sweep to cut geometry out of the host wall.
|
|
DefaultSetback |
The sweep setback distance from inserts, such as windows and doors.
|
|
Distance |
The distance from either the top or base of the wall.
|
|
DistanceMeasuredFrom |
Indicates if Distance is measured from the top or bottom of the wall.
|
|
Id |
The id of the sweep or reveal.
|
|
IsCutByInserts |
Indicates if the sweep is cut by wall inserts.
|
|
IsFixed |
Indicates if the described wall sweep is fixed. A sweep is fixed if it is a part of a vertical compound structure.
|
|
IsProfileFlipped |
Indicates if the profile is applied upside-down.
|
|
IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
|
|
IsVertical |
Indicates whether the sweep or reveal is swept vertically or horizontally.
|
|
MaterialId |
The element id of the material used to create the sweep or reveal.
|
|
ProfileId |
The element id of the profile family used to create the sweep or reveal.
|
|
WallOffset |
The offset from the sweep or reveal to the wall.
|
|
WallSide |
The side of the wall to which the sweep or reveal is attached.
|
|
WallSweepType |
The type (either a wall sweep or a reveal).
|