The DuctSettings type exposes the following members.
Methods
Name | Description | |
---|---|---|
ArePhasesModifiable |
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from
Element
.)
|
|
CanBeHidden |
Indicates if the element can be hidden in the view.
(Inherited from
Element
.)
|
|
CanBeLocked |
Identifies if the element can be locked.
(Inherited from
Element
.)
|
|
CanDeleteSubelement |
Checks if given subelement can be removed from the element.
(Inherited from
Element
.)
|
|
CanHaveAnalyticalModel |
Indicates whether the Element can have an Analytical Model.
(Inherited from
Element
.)
|
|
CanHaveTypeAssigned |
Identifies if the element can have a type assigned.
(Inherited from
Element
.)
|
|
ChangeTypeId(ElementId) |
Changes the type of the element.
(Inherited from
Element
.)
|
|
DeleteEntity |
Deletes the existing entity created by %schema% in the element
(Inherited from
Element
.)
|
|
DeleteSubelement |
Removes a subelement from the element.
(Inherited from
Element
.)
|
|
DeleteSubelements |
Removes the subelements from the element.
(Inherited from
Element
.)
|
|
Dispose | (Inherited from Element .) | |
Equals |
Determines whether the specified
Object
is equal to the current
Object
.
(Inherited from
Object
.)
|
|
GetAnalyticalModel |
Retrieves writeable Analytical Model for Element.
(Inherited from
Element
.)
|
|
GetAnalyticalModelId |
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from
Element
.)
|
|
GetDependentElements |
Get all elements that, from a logical point of view, are the children of this Element.
(Inherited from
Element
.)
|
|
GetDuctSettings |
Get the duct settings of the project.
|
|
GetEntity |
Returns the existing entity corresponding to the Schema if it has been saved in the
Element, or an invalid entity otherwise.
(Inherited from
Element
.)
|
|
GetEntitySchemaGuids |
Returns the Schema guids of any Entities stored in this element.
(Inherited from
Element
.)
|
|
GetExternalFileReference |
Gets information pertaining to the external file referenced
by the element.
(Inherited from
Element
.)
|
|
GetExternalResourceReference |
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from
Element
.)
|
|
GetExternalResourceReferences |
Gets the full map of the external resource references referenced
by the element.
(Inherited from
Element
.)
|
|
GetGeneratingElementIds |
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from
Element
.)
|
|
GetGeometryObjectFromReference |
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from
Element
.)
|
|
GetHashCode |
Serves as a hash function for a particular type.
(Inherited from
Object
.)
|
|
GetMaterialArea |
Gets the area of the material with the given id.
(Inherited from
Element
.)
|
|
GetMaterialIds |
Gets the element ids of all materials present in the element.
(Inherited from
Element
.)
|
|
GetMaterialVolume |
Gets the volume of the material with the given id.
(Inherited from
Element
.)
|
|
GetMonitoredLinkElementIds |
Provides the link instance IDs when the element is monitoring.
(Inherited from
Element
.)
|
|
GetMonitoredLocalElementIds |
Provides the local element IDs when the element is monitoring.
(Inherited from
Element
.)
|
|
GetOrderedParameters |
Gets the parameters associated to the element in order.
(Inherited from
Element
.)
|
|
GetParameterFormatOptions |
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from
Element
.)
|
|
GetParameters |
Retrieves the parameters from the element via the given name.
(Inherited from
Element
.)
|
|
GetPhaseStatus |
Gets the status of a given element in the input phase
(Inherited from
Element
.)
|
|
GetPressLossCalculationServerInfo |
Get the MEPServerInfo of the current pipe pressure loss calculation server.
|
|
GetSpecificFittingAngles |
Gets the list of specific fitting angles.
|
|
GetSpecificFittingAngleStatus |
Gets the status of given specific angle.
|
|
GetSubelements |
Returns the collection of element subelements.
(Inherited from
Element
.)
|
|
GetType |
Gets the
Type
of the current instance.
(Inherited from
Object
.)
|
|
GetTypeId |
Returns the identifier of this element's type.
(Inherited from
Element
.)
|
|
GetValidTypes |
Obtains a set of types that are valid for this element.
(Inherited from
Element
.)
|
|
HasPhases |
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from
Element
.)
|
|
IsExternalFileReference |
Determines whether this Element represents an external
file.
(Inherited from
Element
.)
|
|
IsHidden |
Identifies if the element has been permanently hidden in the view.
(Inherited from
Element
.)
|
|
IsMonitoringLinkElement |
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from
Element
.)
|
|
IsMonitoringLocalElement |
Indicate whether an element is monitoring other local elements.
(Inherited from
Element
.)
|
|
IsPhaseCreatedValid |
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from
Element
.)
|
|
IsPhaseDemolishedValid |
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from
Element
.)
|
|
IsValidSpecificFittingAngle |
Checks that the given value is a valid specific fitting angle. The specific fitting angles are angles of 90, 60, 45, 30, 22.5 or 11.25 degrees.
|
|
IsValidType(ElementId) |
Checks if given type is valid for this element.
(Inherited from
Element
.)
|
|
LookupParameter |
Attempts to find a parameter on the element which has the given name.
(Inherited from
Element
.)
|
|
RefersToExternalResourceReference |
Determines whether this Element uses external resources associated with
a specified external resource type.
(Inherited from
Element
.)
|
|
RefersToExternalResourceReferences |
Determines whether this Element uses external resources.
(Inherited from
Element
.)
|
|
SetEntity |
Stores the entity in the element. If an Entity described by the same Schema already
exists, it is overwritten.
(Inherited from
Element
.)
|
|
SetPressLossCalculationServerInfo |
Set the MEPServerInfo of the current pipe pressure loss calculation server.
|
|
SetSpecificFittingAngleStatus |
Sets the status of given specific angle.
|
|
ToString |
Returns a string that represents the current object.
(Inherited from
Object
.)
|
Properties
Name | Description | |
---|---|---|
AirDensity |
The air density.
|
|
AirViscosity |
The air dynamic viscosity.
|
|
AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from
Element
.)
|
|
BoundingBox |
Retrieves a box that circumscribes all geometry of the element.
(Inherited from
Element
.)
|
|
Category |
Retrieves a Category object that represents the category or sub category in which the
element resides.
(Inherited from
Element
.)
|
|
Centerline |
The abbreviation of the Centerline (=) string.
|
|
ConnectorSeparator |
The duct connector separator string.
|
|
CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from
Element
.)
|
|
DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from
Element
.)
|
|
DesignOption |
Returns the design option to which the element belongs.
(Inherited from
Element
.)
|
|
Document |
Returns the Document in which the Element resides.
(Inherited from
Element
.)
|
|
FittingAngleUsage |
Determine how to use fitting angle during duct layout or modifying layout.
|
|
FittingAnnotationSize |
The value of fitting annotation size.
|
|
FlatOnBottom |
The abbreviation of the Flat On Bottom (FOB) string.
|
|
FlatOnTop |
The abbreviation of the Flat On Top (FOT) string.
|
|
Geometry |
Retrieves the geometric representation of the element.
(Inherited from
Element
.)
|
|
GroupId |
The id of the group to which an element belongs.
(Inherited from
Element
.)
|
|
Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from
Element
.)
|
|
IsTransient |
Indicates whether an element is transient or permanent.
(Inherited from
Element
.)
|
|
IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from
Element
.)
|
|
LevelId |
The id of the level associated with the element.
(Inherited from
Element
.)
|
|
Location |
This property is used to find the physical location of an element within a project.
(Inherited from
Element
.)
|
|
Name |
A human readable name for the Element.
(Inherited from
Element
.)
|
|
OvalDuctSizeSeparator |
The oval duct size separator string.
|
|
OvalDuctSizeSuffix |
The oval duct size suffix string.
|
|
OwnerViewId |
The id of the view that owns the element.
(Inherited from
Element
.)
|
|
Parameter Guid |
Retrieves a parameter from the element given a GUID for a shared parameter.
(Inherited from
Element
.)
|
|
Parameter BuiltInParameter |
Retrieves a parameter from the element given a parameter id.
(Inherited from
Element
.)
|
|
Parameter Definition |
Retrieves a parameter from the element based on its definition.
(Inherited from
Element
.)
|
|
Parameters |
Retrieves a set containing all of the parameters that are contained within the element.
(Inherited from
Element
.)
|
|
ParametersMap |
Retrieves a map containing all of the parameters that are contained within the element.
(Inherited from
Element
.)
|
|
Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from
Element
.)
|
|
RectangularDuctSizeSeparator |
The rectangular duct size separator string.
|
|
RectangularDuctSizeSuffix |
The rectangular duct size suffix string.
|
|
RiseDropAnnotationSize |
The rise drop annotation size.
|
|
RoundDuctSizePrefix |
The round duct size prefix string.
|
|
RoundDuctSizeSuffix |
The round duct size suffix string.
|
|
SetDown |
The abbreviation of the Set Down from top (TD) of fitting string.
|
|
SetDownFromBottom |
The abbreviation of the Set Down from bottom (BD) of fitting string.
|
|
SetUp |
The abbreviation of the Set Up from top (TU) of fitting string.
|
|
SetUpFromBottom |
The abbreviation of the Set Up from bottom (BU) of fitting string.
|
|
UniqueId |
A stable unique identifier for an element within the document.
(Inherited from
Element
.)
|
|
UseAnnotationScaleForSingleLineFittings |
Indicates whether use annotation scale for single line fittings or not.
|
|
VersionGuid |
Get the element version Guid.
(Inherited from
Element
.)
|
|
ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from
Element
.)
|
|
WorksetId |
Get Id of the Workset which owns the element.
(Inherited from
Element
.)
|