RebarShapeSegment Class


Part of a RebarShapeDefinitionBySegments, representing one segment of a shape definition. Makes sure constraints of type RebarShapeConstraintFixedSegmentDir are uniquely set. If we try to aquire a second constraint of type RebarShapeConstraintFixedSegmentDir we delete the old one.

Namespace: Autodesk.Revit.DB.Structure
Assembly: RevitAPI (in RevitAPI.dll) Version: 19.0.0.0 (19.0.0.405)
Since: 2012

Syntax

C#
public class RebarShapeSegment : IDisposable
Visual Basic
Public Class RebarShapeSegment _
	Implements IDisposable
Visual C++
public ref class RebarShapeSegment : IDisposable

Remarks

Each segment must have enough constraints to determine its position. Overconstraining is allowed. The most common combinations are:

  • A fixed direction together with a parallel length constraint;
  • A parallel length constraint plus another length constraint parallel to the x-axis or y-axis;
  • A parallel length constraint plus length constraints parallel to both the x-axis and y-axis.
Multiple constraints may be driven by the same parameter, even on the same segment.

Length constraints may be measured in two ways. For "measured to the outside of the bend," the reference is a tangent to the exterior face of the bar; the thickness of the bar is included. For "measured to the inside," the reference is the center of the arc of the bend; this is the point where the bend begins, if the constraint is parallel to the segment.

A 180-degree bend is described by introducing a short segment in between the two straight segments, tangent to the midpoint of the bend.

Inheritance Hierarchy

System Object
Autodesk.Revit.DB.Structure RebarShapeSegment

See Also