The PartMakerMethodToDivideVolumes type exposes the following members.
Methods
Name | Description | |
---|---|---|
AddIntersectingReference |
Adds intersecting reference with an offset.
|
|
AreElementsValidIntersectingReferences(ICollection ElementId ) |
Identifies if provided members are valid.
|
|
AreElementsValidIntersectingReferences(Document, ICollection ElementId ) |
Identifies if provided members are valid.
|
|
CanBeDivisionProfile(ElementId) |
Checks whether a family defines a profile which can be used by this method.
|
|
CanBeDivisionProfile(ElementId, Document) |
Checks whether a family defines a profile which can be used by this method.
|
|
Dispose |
Releases all resources used by the
PartMakerMethodToDivideVolumes
|
|
Equals | (Inherited from Object .) | |
GetHashCode |
Serves as a hash function for a particular type.
(Inherited from
Object
.)
|
|
GetOffsetForIntersectingReference |
Gets offset for the intersecting reference.
|
|
GetPlaneOfSketch |
Gets the plane of the sketch.
|
|
GetSketchCurves |
Populates the array with copies of curves in the sketch.
|
|
GetSplitRefsOffsets |
Returns offsets for plane-defining splitters.
|
|
GetType |
Gets the
Type
of the current instance.
(Inherited from
Object
.)
|
|
IsElementValidIntersectingReference(ElementId) |
Identifies if the provided member is valid.
|
|
IsElementValidIntersectingReference(Document, ElementId) |
Identifies if the provided member is valid.
|
|
IsValidSketchPlane |
Identifies if provided sketch plane is valid.
|
|
RemoveIntersectingReference |
Removed intersecting reference.
|
|
SetOffsetForIntersectingReference |
Sets offset for the intersecting reference.
|
|
ToString |
Returns a string that represents the current object.
(Inherited from
Object
.)
|
|
UsesReference |
Identifies if the PartMaker uses the intersecting reference.
|
Properties
Name | Description | |
---|---|---|
DivisionGap |
The gap which is created between matching profiles of parts.
|
|
DivisionPatternMirror |
Whether pattern defined by the division rule should be mirrored before application
Mirroring is similar to changing indices of u-const gridlines.
|
|
DivisionRotationAngle |
Angle by which both u- and v- gridlines of the division are rotated with respect
to the natural u/v-const directions of the sketch plane.
|
|
DivisionRuleId |
Id of the 'DivisionRule' which is used to augment the cutting sketch.
|
|
IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
|
|
ProfileFlipAcross |
True if the corresponding left/upper parts profile are mirrored with respect
to the division line. False if the profile of left/upper parts are defined
directly by the profile family.
|
|
ProfileFlipAlong |
True if the corresponding left/upper parts profile are mirrored with respect
to the center line of the hosts to be divided. False if the profile of
left/upper parts are defined directly by the profile family.
|
|
ProfileMatch |
Determines how two profiles match.
|
|
ProfileOffset |
The offset which is applied to a family-defined profile in the
direction away from the division line and toward left/upper part
to obtain its profile.
|
|
ProfileType |
The id of the profile family applied to boundaries between parts.
|
|
UConstDivisionIndent |
Indentation for the application of division rule's pattern across u-const gridlines
(i.e., similar to changing indices of u-const gridlines).
|
|
VConstDivisionIndent |
Indentation for the application of division rule's pattern across v-const gridlines
(i.e., similar to changing indices of v-const gridlines).
|