Adds a filter to the view.

Add a space at specific cell.

Add a spare at specific cell.

Identifies if this view allows display of Analysis results.

Applies to this view the parameters of the input view that are not controlled by the current view template.

Determines if Visibility/Graphics Overriddes can be applied to the view.

Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.

Indicates if the element can be hidden in the view.

Identifies if the element can be locked.

Checks whether the category can be hidden in the view.

Check if category can be temporarily hidden in the view.

Checks if given subelement can be removed from the element.

Indicates if Temporary View Properties mode can be applied for view in current state.

Indicates whether the Element can have an Analytical Model.

Identifies if the element can have a type assigned.

Check if Detail Level can be modified.

Indicates if DisplayStyle can be modified.

Indicates if the View Discipline can be modified

Verifies if can circuits in the source slot to the specific slot.

Indicates if view can use Depth Cueing

Indicates if view can use temporary visibility modes

Identifies if this view can be duplicated.

Changes the type of the element.

Convert all temporary hidden elements or categories to permanently hidden in view.

Convert the dependent view to independent.

Creates a new instance of this view (using default template)

Creates a new instance of this view (using specific template)

Creates a new view template instance from this view instance.

Deletes the existing entity created by %schema% in the element

Removes a subelement from the element.

Removes the subelements from the element.

Disables the specified temporary view mode.

Duplicates this view.

Enables Reveal Hidden elements mode.

Turns Temporary View Properties mode on or off. In this mode, any changes made to the view are temporary and will be discarded once the mode is disabled.

Determines whether the specified Object is equal to the current Object .

Assigns the data from the template to the instance and performs any tasks specific to the instance (3rd phase, borders, etc)

Retrieves writeable Analytical Model for Element.

Retrieves the Element Id of the Analytical Model Element for this Element.

Gets the apparent load for the given phase for the given slotted circuit

Get all available parameter categories.

Returns the current background set for the view.

Gets the calculated value name for a cell from the template view.

Gets the calculated value text for a cell from the instance view.

Checks if elements of the given category are set to be invisible (hidden) in this view.

Gets graphic overrides for a category in view.

Gets cells for the given slot number

Gets the cell's text based on its type

Gets the circuit element for the given slot number

Gets the circuit id for the given slot number

Returns the combined parameter text for instance view

Returns an object for managing view crop region shape.

Get all elements that, from a logical point of view, are the children of this Element.

Get the ids of dependent views.

Returns the current depth cueing settings for the view.

Returns DirectContext3D handle overrides object for the view.

Gets graphic overrides for an element in the view.

Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.

Returns the Schema guids of any Entities stored in this element.

Gets information pertaining to the external file referenced by the element.

Gets the ExternalResourceReference associated with a specified external resource type.

Gets the full map of the external resource references referenced by the element.

Gets graphic overrides that a filter applies to the view.

Gets the filters applied to the view.

Gets the visibility of the elements associated with a filter.

Returns the ids of the element(s) that generated the input geometry object.

Retrieve one geometric primitive contained in the element given a reference.

Serves as a hash function for a particular type.

Gets the Total Current for given Load Classification

Gets the Total Load for given Load Classification

Gets the Demand Current for given Load Classification

Gets the Demand Factor for given Load Classification

Gets the Demand Load for given Load Classification

Gets the id of the associated Load Classification at the given row

Gets the name of the Load Classification at the given row/column

Gets the load classification parameter value.

Gets the area of the material with the given id.

Gets the element ids of all materials present in the element.

Gets the volume of the material with the given id.

Provides the link instance IDs when the element is monitoring.

Provides the local element IDs when the element is monitoring.

Returns a list of parameters that are not marked as included when this view is used as a template.

Gets the parameters associated to the element in order.

Gets the panel for this view

Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.

Retrieves the parameters from the element via the given name.

Gets the cell's text based on its type

Gets the status of a given element in the input phase

Returns point cloud overrides object for the view.

Get the id of the primary view.

Returns element ids of all reference callouts in the view.

Returns element ids of all reference elevations in the view.

Returns element ids of all reference sections in the view.

Gets section data that will be written to

Returns the current sketchy lines settings for the view.

Gets the slot number in the circuit table

Gets the value of the apparent current parameter for a spare

Gets the value of the apparent load parameter for a spare

Returns the collection of element subelements.

Gets table data that can be written to

Gets the template for this view (to set the template, you must go through generateInstanceFromTemplate)

Returns a list of parameter ids that may be controlled when this view is assigned as a template.

When Temporary View Properties mode is in progress it provides view id that overrode settings for current view. Outside Temporary View Properties mode InvalidElementId will be returned.

When Temporary View Properties mode is in progress, name of applied template is returned. Outside Temporary View Properties mode, empty string will be returned.

Gets the Type of the current instance.

Returns the identifier of this element's type.

Obtains a set of types that are valid for this element.

Returns the current view display model settings for the view.

Returns the visibility settings of a workset for this particular view.

Gets the current worksharing display mode for this view.

Check if the view has a Detail Level property

Indicates if view has a DisplayStyle property

Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.

Indicates if the view has a Discipline property

Hide the active work plane of the view.

Set multiple categories to be temporarily hidden in the view.

Set one category to be temporarily hidden in the view.

Sets the elements to be hidden in the view.

Set multiple elements to be temporarily hidden in the view. To hide a group completely, you must also include all members of all groups and nested groups in your input.

Set one element to be temporarily hidden in the view. To hide a group completely, you must also include all members of all groups and nested groups in your input, therefore you should use the version of this method that accepts multiple element ids as input.

Checks whether the category can have graphic overrides in this view.

Check if this cell in the phase loads

Check if this column in the load summary

Identifies if the input element is visible for the temporary view mode for this view.

Determines whether this Element represents an external file.

Indicates if a filter is applied to the view.

Identifies if the element has been permanently hidden in the view.

Returns true if the view is in a particular temporary view mode.

Indicate whether an element is monitoring any elements in any linked models.

Indicate whether an element is monitoring other local elements.

Set categories to be temporarily isolated in the view.

Set one category to be temporarily isolated in the view.

Set multiple elements to be temporarily isolated in the view. To isolate a group completely, you must also include all members of all groups and nested groups in your input.

Set one element to be temporarily isolated in the view. To isolate a group completely, you must also include all members of all groups and nested groups in your input, therefore you should use the version of this method that accepts multiple element ids as input.

Check if this is a panel schedule template.

Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.

Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.

Check if this row in the circuit table

Check if the slot is in a group

Check if the circuit slot in this cell is locked.

Check if the selected cell is a space

Check if the circuit is a spare

Indicates if the view is temporarily hiding or isolating elements or categories.

Returns true when Temporary View Properties mode is in progress, false otherwise.

Identifies if the section type is valid for this view.

Checks if given type is valid for this element.

Verifies that the view represented by templateId can be set as the controlling view template for this view.

Verifies that the view is valid for template creation.

Indicates whether the workset is visible in this view.

Attempts to find a parameter on the element which has the given name.

Move the circuits in the source slot to the specific slot.

Print this view with the default view template and using the print setting of the current active document.

Print this view with the default view template, and either the view's document's print setting or the print setting of the current active document.

Print this view with the given view template and using the print setting of the current active document.

Print this view with the given view template, and either the view's document's print setting or the print setting of the current active document.

Determines whether this Element uses external resources associated with a specified external resource type.

Determines whether this Element uses external resources.

Removes a filter from the view.

Remove a space at specific cell.

Remove a spare at specific cell.

Sets the background for the view. Background can only be set for 3d views and for Sections/Elevations.

Sets if elements of the given category will be visible in this view.

Sets graphic overrides for a category in view.

Sets the depth cueing settings for the view.

Sets graphic overrides for an element in the view.

Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.

Sets the overrides associated with a filter.

Sets the visibility of the elements associated with a filter.

Sets the parameters that will not be included when this view is used as a template.

Sets the text for the given cell, returns true if successful, false otherwise

Sets the sketchy lines settings for the view.

Sets the value of the apparent current parameter for a spare

Sets the value of the apparent load parameter for a spare

Sets the view display model settings for the view.

Sets visibility for a workset in this view.

Sets the worksharing display mode for this view.

Show the active work plane of the view.

Checks that the view can have the Reveal Constraints mode activated.

Checks whether this view supports the given worksharing display mode.

Returns a string that represents the current object.

Sets the elements to be shown in the given view if they are currently hidden.

Element id of Analysis Display Style associated with the view.

Indicates if analytical model categories are currently hidden in the view.

Indicates if annotation categories are currently hidden in the view.

Indicates if Coordination Model handles are currently hidden in the view.

Indicates if import categories are currently hidden in the view.

Indicates if model categories are currently hidden in the view.

Indicates if point clouds are currently hidden in the view.

The id of the assembly instance to which the element belongs.

The Id of the assembly instance that owns the assembly view.

Retrieves a box that circumscribes all geometry of the element.

Test whether the view can be printed.

Retrieves a Category object that represents the category or sub category in which the element resides.

Id of a Phase at which the Element was created.

The Crop Box applied to the view, or an outline encompassing the crop region applied to the view.

Whether or not the Crop Box/Region is active for the view.

Whether or not the Crop Box/Region is visible for the view.

Id of a Phase at which the Element was demolished.

Returns the design option to which the element belongs.

The detail level of this view.

The Discipline of the view.

The DisplayStyle of the view. Returns DisplayStyle.Wireframe if the view has no display style.

Returns the Document in which the Element resides.

The level for the view.

Retrieves the geometric representation of the element.

The id of the group to which an element belongs.

A unique identifier for an Element in an Autodesk Revit project.

Indicates if the view is assembly view.

Test whether the view is a view template.

Indicates whether an element is transient or permanent.

Specifies whether the .NET object represents a valid Revit entity.

The id of the level associated with the element.

This property is used to find the physical location of an element within a project.

Gets the maximum column width

Gets the allowed maximum grid width

Gets the maximum row height

Gets the minimum column width

Gets the minimum row height

A human readable name for the Element.

Returns the origin of the screen.

The bounds of the view in paper space (in feet).

The id of the view that owns the element.

Retrieves a parameter from the element given a GUID for a shared parameter.

Retrieves a parameter from the element given a parameter id.

Retrieves a parameter from the element based on its definition.

Retrieves a set containing all of the parameters that are contained within the element.

Retrieves a map containing all of the parameters that are contained within the element.

The visibility setting for parts in this view.

Identifies if the element has been pinned to prevent changes.

Indicates whether the Reveal Constraints mode is activated in the view.

The direction towards the right side of the screen.

The scale of the view.

The intesity of cast shadows - 0 = no shadows, 100 = black.

The sketch plane assigned to the view for model curve creation.

The sun and shadow settings assigned to the view for shadow calculation and rendering.

The intensity of the simulated (directional) sunlight. 0 = no directional light; maximum value is 100.

the element id of the element that is being viewed

Data of temporary view modes associated with this view.

The view title. This consists of the view name plus other modifiers, such as the view type, sheet number, area scheme, and/or assembly type, depending on the specifics of the view.

A stable unique identifier for an element within the document.

The direction towards the top of the screen.

The direction towards the viewer.

Identifies if the element is owned by a view.

The id of the template view that controls this view's parameters.

The type of the view.

Get Id of the Workset which owns the element.