•  

FabricationPart Members

The FabricationPart type exposes the following members.

Methods

Name Description
Public method AddPartCustomData
Add custom data type to the fabrication part. The new data gets the default value defined by the fabrication configuration.
Public method AdjustEndLength
Adjusts the length for the specified connector.
Public method Static member AlignPartByConnector
Align the part by its connector to a point and rotation in free space.
Public method Static member AlignPartByConnectors
Moves fabrication part by one of its connectors and aligns it to another connector.
Public method Static member AlignPartByConnectorToConnector
Align a part by its connector to another connector. This will replace the FabricationPart::AlignPartByConnectors method.
Public method Static member AlignPartByInsertionPoint
Align the part by its insertion point to a point and rotation in free space.
Public method Static member AlignPartByInsertionPointAndCutInToStraight
Align the part by its insertion point to a point and rotation on a straight. This will automatically size and connect the part being cut into, if possible.
Public method ArePhasesModifiable
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from Element .)
Public method CanAdjustEndLength
Checks if the end of fabrication part can be adjusted.
Public method CanASlopeBeApplied
This will test if a slope can be applied to the part and maintain connections with any connected parts.
Public method CanBeHidden
Indicates if the element can be hidden in the view.
(Inherited from Element .)
Public method CanBeLocked
Identifies if the element can be locked.
(Inherited from Element .)
Public method CanDeleteSubelement
Checks if given subelement can be removed from the element.
(Inherited from Element .)
Public method CanHaveAnalyticalModel
Indicates whether the Element can have an Analytical Model.
(Inherited from Element .)
Public method CanHaveTypeAssigned
Identifies if the element can have a type assigned.
(Inherited from Element .)
Public method CanSplitStraight
Validates if the straight can be split into two at the passed in point.
Public method ChangeTypeId(ElementId)
Changes the type of the element.
(Inherited from Element .)
Public method Static member ConnectAndCouple
Makes a connection between the specified connectors and adds coupling if necessary.
Public method Static member Create(Document, FabricationItemFile, ElementId)
Creates a fabrication part element from a fabrication item file.
Public method Static member Create(Document, FabricationServiceButton, Int32, ElementId)
Creates a fabrication part element based on button.
Public method Static member Create(Document, FabricationServiceButton, Double, Double, ElementId)
Creates a fabrication part element based on button and size.
Public method Static member CreateHanger(Document, FabricationServiceButton, Int32, ElementId)
Creates a free placed hanger.
Public method Static member CreateHanger(Document, FabricationServiceButton, ElementId, Connector, Double, Boolean)
Creates a hanger on the fabrication part.
Public method Static member CreateHanger(Document, FabricationServiceButton, Int32, ElementId, Connector, Double, Boolean)
Creates a hanger on the fabrication part.
Public method DeleteEntity
Deletes the existing entity created by %schema% in the element
(Inherited from Element .)
Public method DeleteSubelement
Removes a subelement from the element.
(Inherited from Element .)
Public method DeleteSubelements
Removes the subelements from the element.
(Inherited from Element .)
Public method Dispose (Inherited from Element .)
Public method Equals
Determines whether the specified Object is equal to the current Object .
(Inherited from Object .)
Public method GetAnalyticalModel
Retrieves writeable Analytical Model for Element.
(Inherited from Element .)
Public method GetAnalyticalModelId
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from Element .)
Public method GetCalculatedDimensionValue
Gets the calculated dimension value.
Public method GetDependentElements
Get all elements that, from a logical point of view, are the children of this Element.
(Inherited from Element .)
Public method GetDimensionCalculatedOptions
Gets the calculated options of the fabrication dimension.
Public method GetDimensions
Gets all fabrication dimensions.
Public method GetDimensionValue
Gets the value of the fabrication dimension, returns value in Revit internal units.
Public method GetEntity
Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.
(Inherited from Element .)
Public method GetEntitySchemaGuids
Returns the Schema guids of any Entities stored in this element.
(Inherited from Element .)
Public method GetExternalFileReference
Gets information pertaining to the external file referenced by the element.
(Inherited from Element .)
Public method GetExternalResourceReference
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from Element .)
Public method GetExternalResourceReferences
Gets the full map of the external resource references referenced by the element.
(Inherited from Element .)
Public method GetGeneratingElementIds
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from Element .)
Public method GetGeometryObjectFromReference
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from Element .)
Public method GetHashCode
Serves as a hash function for a particular type.
(Inherited from Object .)
Public method GetHostedInfo
Gets the fabrication hosted element information.
Public method GetInsulationLiningGeometry
Gets insulation and lining geometry for this fabrication part.
Public method GetMaterialArea
Gets the area of the material with the given id.
(Inherited from Element .)
Public method GetMaterialIds
Gets the element ids of all materials present in the element.
(Inherited from Element .)
Public method GetMaterialVolume
Gets the volume of the material with the given id.
(Inherited from Element .)
Public method GetMonitoredLinkElementIds
Provides the link instance IDs when the element is monitoring.
(Inherited from Element .)
Public method GetMonitoredLocalElementIds
Provides the local element IDs when the element is monitoring.
(Inherited from Element .)
Public method GetOrderedParameters
Gets the parameters associated to the element in order.
(Inherited from Element .)
Public method GetParameterFormatOptions
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from Element .)
Public method GetParameters
Retrieves the parameters from the element via the given name.
(Inherited from Element .)
Public method GetPartAncillaryUsage
Gets a list of all ancillary usage information for the part.
Public method GetPartCustomDataInteger
Get custom data integer value for the specified custom data.
Public method GetPartCustomDataReal
Get custom data real value for the specified custom data.
Public method GetPartCustomDataText
Get custom data text for the specified custom data.
Public method GetPhaseStatus
Gets the status of a given element in the input phase
(Inherited from Element .)
Public method GetProductListEntryCount
Gets the number of product entries for this part.
Public method GetProductListEntryName
Gets the specified product list entry name.
Public method GetRodInfo
Gets the fabrication rod information.
Public method GetSubelements
Returns the collection of element subelements.
(Inherited from Element .)
Public method GetTransform
Gets the transformation matrix of the fabrication part element.
Public method GetType
Gets the Type of the current instance.
(Inherited from Object .)
Public method GetTypeId
Returns the identifier of this element's type.
(Inherited from Element .)
Public method GetValidTypes
Obtains a set of types that are valid for this element.
(Inherited from Element .)
Public method GetVersionHistory
Gets a history of version change information about the current part.
Public method HasCustomData
Check if fabrication part contains custom data already.
Public method HasNoConnections
Checks to see if all the fabrication part's connectors are open.
Public method HasPhases
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from Element .)
Public method IsAHanger
Checks whether it is a hanger.
Public method IsAStraight
Checks whether it is a straight part.
Public method IsATap
Checks if it is any sort of tap.
Public method IsDimensionCalculated
Checks if the fabrication dimension is calculated.
Public method IsExternalFileReference
Determines whether this Element represents an external file.
(Inherited from Element .)
Public method IsHidden
Identifies if the element has been permanently hidden in the view.
(Inherited from Element .)
Public method IsMonitoringLinkElement
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from Element .)
Public method IsMonitoringLocalElement
Indicate whether an element is monitoring other local elements.
(Inherited from Element .)
Public method IsPhaseCreatedValid
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from Element .)
Public method IsPhaseDemolishedValid
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from Element .)
Public method IsProductList
Gets whether or not the fabrication part is a product list.
Public method IsProductListEntryCompatibleSize
Checks to see if this part can be changed to the specified product entry without altering any connected dimensions.
Public method IsSameAs
Compare this fabrication part with the part passed and checks the pattern dimensions and options. A list of fields that can be ignored in the comparison check can be specified.
Public method IsValidType(ElementId)
Checks if given type is valid for this element.
(Inherited from Element .)
Public method LookupParameter
Attempts to find a parameter on the element which has the given name.
(Inherited from Element .)
Public method Static member OptimizeLengths
Optimizes the length fabrication straight parts.
Public method Static member PlaceAsTap
Places the part by its connector to a specific position on the straight part at the specified distance from the host part connector.
Public method Static member PlaceFittingAsCutIn
Places the fitting on the straight part by cut in, use the fitting's focal point as the insertion position.
Public method RefersToExternalResourceReference
Determines whether this Element uses external resources associated with a specified external resource type.
(Inherited from Element .)
Public method RefersToExternalResourceReferences
Determines whether this Element uses external resources.
(Inherited from Element .)
Public method RemovePartCustomData
Remove custom data from the fabrication part.
Public method Static member Reposition
Repositions the fabrication straight part to another end of the run.
Public method Static member RotateConnectedPartByConnector
Rotates a connected fabrication part around the axis of the specified connector.
Public method Static member RotateConnectedTap
Rotates a connected fabrication tap by the specified angles about the primary and secondary axis.
Public method Static member SaveAsFabricationJob
Save fabrication parts to an MEP job that can be opened in the fabrication software.
Public method SetCalculatedDimensionValue
Sets the calculated dimension value.
Public method SetDimensionValue
Sets the fabrication dimension value. The value is in Revit internal units.
Public method SetEntity
Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.
(Inherited from Element .)
Public method SetPartCustomDataInteger
Set the custom data integer value for the specified custom data.
Public method SetPartCustomDataReal
Set the custom data real value for the specified custom data.
Public method SetPartCustomDataText
Set the custom data real value for the specified custom data.
Public method SetPositionByEnd
Positions the connector of the fabrication part element by the passed point.
Public method SplitStraight(XYZ)
Splits the straight into two at the passed in point.
Public method SplitStraight(Document, ElementId, XYZ)
Splits the straight into two at the passed in point.
Public method Static member StretchAndFit
Stretch the fabrication part from the specified connector and fit to the target routing end.
Public method ToString
Returns a string that represents the current object.
(Inherited from Object .)

Properties

Name Description
Public property Alias
The alias of the fabrication part.
Public property AssemblyInstanceId
The id of the assembly instance to which the element belongs.
(Inherited from Element .)
Public property BottomOfPartElevation
The associated elevation to the bottom of fabrication part off of the current level.
Public property BoundingBox
Retrieves a box that circumscribes all geometry of the element.
(Inherited from Element .)
Public property Category
Retrieves a Category object that represents the category or sub category in which the element resides.
(Inherited from Element .)
Public property CenterlineLength
The centerline length of the fabrication part.
Public property ConnectorManager
The connector manager of the fabrication part.
Public property CreatedPhaseId
Id of a Phase at which the Element was created.
(Inherited from Element .)
Public property CutType
The cut type of the fabrication part.
Public property DemolishedPhaseId
Id of a Phase at which the Element was demolished.
(Inherited from Element .)
Public property DesignOption
Returns the design option to which the element belongs.
(Inherited from Element .)
Public property Document
Returns the Document in which the Element resides.
(Inherited from Element .)
Public property DomainType
The domain type for the fabrication part.
Public property DoubleWallMaterial
The double wall material identifier of the fabrication part.
Public property DoubleWallMaterialArea
The double wall material area of the fabrication part. If the fabrication part is not double walled, returns zero.
Public property DoubleWallMaterialThickness
The double wall material thickness of the fabrication part. If the fabrication part is not double walled, returns zero.
Public property FreeSize
The inner size of the fabrication part.
Public property Geometry
Retrieves the geometric representation of the element.
(Inherited from Element .)
Public property GeometryChecksum
Gets the geometry checksum of the fabrication part symbol, and it does nothing with the fabrication part instance position.
Public property GroupId
The id of the group to which an element belongs.
(Inherited from Element .)
Public property HangerRodKit
Specifies whether an ancillary kit is being used to override support rods, bolts and clips, if any. A value of 0 indicates no override is being used.
Public property HasDoubleWall
True if the fabrication part is double walled.
Public property HasInsulation
True if the fabrication part is insulated.
Public property HasLining
True if the fabrication part is lined.
Public property Id
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element .)
Public property InsulationArea
The insulation area of the fabrication part. If the fabrication part is not insulated, returns zero.
Public property InsulationSpecification
The fabrication part insulation specification identifier.
Public property InsulationThickness
The insulation thickness of the fabrication part. If the fabrication part is not insulated, returns zero.
Public property InsulationType
The insulation type of the fabrication part.
Public property IsBoughtOut
True if the fabrication part is bought out.
Public property IsTransient
Indicates whether an element is transient or permanent.
(Inherited from Element .)
Public property IsValidObject
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element .)
Public property ItemCustomId
The item custom identifier for the fabrication part.
Public property ItemNumber
The item number that is used for identification, re-ordering from shop.
Public property LevelId
The id of the level associated with the element.
(Inherited from Element .)
Public property LevelOffset
The associated level offset that indicates the distance from the center of the fabrication part to the current level.
Public property LiningArea
The lining area of the fabrication part. If the fabrication part is not lined, returns zero.
Public property LiningThickness
The lining thickness of the fabrication part. If the fabrication part is not lined, returns zero.
Public property LiningType
The lining type of the fabrication part.
Public property Location
This property is used to find the physical location of an element within a project.
(Inherited from Element .)
Public property Material
The fabrication material identifier.
Public property MaterialThickness
The material thickness of the fabrication part.
Public property Name
A human readable name for the Element.
(Inherited from Element .)
Public property Notes
The notes of the fabrication part.
Public property Origin
The origin of the fabrication part element.
Public property OverallSize
The overall size of the fabrication part.
Public property OwnerViewId
The id of the view that owns the element.
(Inherited from Element .)
Public property Parameter Guid
Retrieves a parameter from the element given a GUID for a shared parameter.
(Inherited from Element .)
Public property Parameter BuiltInParameter
Retrieves a parameter from the element given a parameter id.
(Inherited from Element .)
Public property Parameter Definition
Retrieves a parameter from the element based on its definition.
(Inherited from Element .)
Public property Parameters
Retrieves a set containing all of the parameters that are contained within the element.
(Inherited from Element .)
Public property ParametersMap
Retrieves a map containing all of the parameters that are contained within the element.
(Inherited from Element .)
Public property PartGuid
The fabrication part's globally unique identifier.
Public property PartStatus
The status identifier for the fabrication part.
Public property Pinned
Identifies if the element has been pinned to prevent changes.
(Inherited from Element .)
Public property ProductCode
The current database id of the part within the fabrication database.
Public property ProductDataRange
The product data range of the fabrication part.
Public property ProductFinishDescription
The product finish description of the fabrication part.
Public property ProductInstallType
The product install type of the fabrication part.
Public property ProductListEntry
The product entry index of the fabrication part. A value of -1 indicates the fabrication part is not a product list.
Public property ProductLongDescription
The product long description of the fabrication part.
Public property ProductMaterialDescription
The product material description of the fabrication part.
Public property ProductName
The product name of the fabrication part.
Public property ProductOriginalEquipmentManufacture
The product original equipment manufacture (OEM) of the fabrication part.
Public property ProductShortDescription
The product short description of the fabrication part.
Public property ProductSizeDescription
The product size description of the fabrication part.
Public property ProductSpecificationDescription
The product specification description of the fabrication part.
Public property ServiceAbbreviation
The associated service abbreviation for the fabrication service.
Public property ServiceId
The fabrication part service identifier. The service can only be changed to compatible services.
Public property ServiceName
The name of the service associated with the fabrication part.
Public property ServiceType
The service type identifier of the fabrication part.
Public property SheetMetalArea
The sheet metal area of the fabrication part.
Public property Size
The size of the fabrication part.
Public property Slope
The slope for the straight fabrication part.
Public property Specification
The fabrication part specification identifier.
Public property SpoolName
The spool name of the fabrication part.
Public property TopOfPartElevation
The associated elevation to the top of fabrication part off of the current level.
Public property UniqueId
A stable unique identifier for an element within the document.
(Inherited from Element .)
Public property ValidationStatus
The validation status of the fabrication part.
Public property Vendor
The vendor of the fabrication part.
Public property VendorCode
The vendor code of the fabrication part.
Public property ViewSpecific
Identifies if the element is owned by a view.
(Inherited from Element .)
Public property Weight
The weight of the fabrication part.
Public property WorksetId
Get Id of the Workset which owns the element.
(Inherited from Element .)

See Also