Appends one vertex to the end of the wire.

Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.

Checks if the given vertex points are valid for the wire.

Indicates if the element can be hidden in the view.

Identifies if the element can be locked.

Checks if given subelement can be removed from the element.

Indicates whether the Element can have an Analytical Model.

Identifies if the element can have a type assigned.

Changes the type of the element.

Connects the wire to other elements.

Creates a new wire.

Deletes the existing entity created by %schema% in the element

Removes a subelement from the element.

Removes the subelements from the element.

Determines whether the specified Object is equal to the current Object .

Gets the ids of the instances inserted into this host object.

Retrieves writeable Analytical Model for Element.

Retrieves the Element Id of the Analytical Model Element for this Element.

Get all elements that, from a logical point of view, are the children of this Element.

Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.

Returns the Schema guids of any Entities stored in this element.

Gets information pertaining to the external file referenced by the element.

Gets the ExternalResourceReference associated with a specified external resource type.

Gets the full map of the external resource references referenced by the element.

Returns the ids of the element(s) that generated the input geometry object.

Retrieve one geometric primitive contained in the element given a reference.

Serves as a hash function for a particular type.

Gets the area of the material with the given id.

Gets the element ids of all materials present in the element.

Gets the volume of the material with the given id.

Gets the systems to which the wire belongs.

Provides the link instance IDs when the element is monitoring.

Provides the local element IDs when the element is monitoring.

Gets the parameters associated to the element in order.

Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.

Retrieves the parameters from the element via the given name.

Gets the status of a given element in the input phase

Returns the collection of element subelements.

Gets the Type of the current instance.

Returns the identifier of this element's type.

Obtains a set of types that are valid for this element.

Gets the position of an existing vertex.

Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.

Inserts a new vertex before the specified index.

Determines whether this Element represents an external file.

Identifies if the element has been permanently hidden in the view.

Indicate whether an element is monitoring any elements in any linked models.

Indicate whether an element is monitoring other local elements.

Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.

Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.

Checks if given type is valid for this element.

Checks if the given vertex point can be added to this wire.

Attempts to find a parameter on the element which has the given name.

Determines whether this Element uses external resources associated with a specified external resource type.

Determines whether this Element uses external resources.

Removes the vertex corresponding to the specified index. Can not remove the start or end vertex if it already connects to other element.

Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.

Sets the position of a given vertex. If the vertex is start or end point, and the wire connects to electrical device, the wire end offset will be set according to the given vertex. If the vertex is start or end point, and the wire connects to other wire, user can't set the vertex and exception will be thrown. If the vertex is start or end point, and the wire connects to nothing, the vertex will be set as the given vertex.

Returns a string that represents the current object.

The id of the assembly instance to which the element belongs.

Retrieves a box that circumscribes all geometry of the element.

Retrieves a Category object that represents the category or sub category in which the element resides.

The connector manager of this MEP curve.

Id of a Phase at which the Element was created.

Id of a Phase at which the Element was demolished.

Returns the design option to which the element belongs.

The diameter of the MEP curve.

Returns the Document in which the Element resides.

Retrieves the geometric representation of the element.

The ground conductor number. Its default value is zero after created.

The id of the group to which an element belongs.

The height of the MEP curve.

The hot conductor number. Its default value is zero after created.

A unique identifier for an Element in an Autodesk Revit project.

Indicates whether an element is transient or permanent.

Specifies whether the .NET object represents a valid Revit entity.

The id of the level associated with the element.

The offset of the MEP curve.

This property is used to find the physical location of an element within a project.

The system of the MEP curve.

A human readable name for the Element.

The neutral conductor number. Its default value is zero after created.

The number of vertices of the wire, including the start and end point.

The id of the view that owns the element.

Retrieves a parameter from the element given a GUID for a shared parameter.

Retrieves a parameter from the element given a parameter id.

Retrieves a parameter from the element based on its definition.

Retrieves a set containing all of the parameters that are contained within the element.

Retrieves a map containing all of the parameters that are contained within the element.

Identifies if the element has been pinned to prevent changes.

The reference level of the MEP curve.

A stable unique identifier for an element within the document.

Get the element version Guid.

Identifies if the element is owned by a view.

The width of the MEP curve.

The wiring type(arc or chamfer) for the wire.

Get Id of the Workset which owns the element.