The EnergyDataSettings type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | AnalysisType | The type of analysis mode. |
| AnalyticalGridCellSize | The cell size for the uniform cubical grid used when computing the building envelope |
| AssemblyInstanceId | The id of the assembly instance to which the element belongs. (Inherited from Element.) |
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element.) |
| BuildingConstructionClass | Used for both the detailed and conceptual energy model Construction class of building as defined by: loose, medium, tight, or none. |
| BuildingEnvelopeDeterminationMethod | Indicates if an analysis should be perform to find the model elements that are part of the building envelope |
| BuildingHVACSystem | The type of HVAC system used by the building for conceptual model energy calculations. |
| BuildingOperatingSchedule | The operating schedule of the building used for conceptual model energy calculations. |
| BuildingType | The type of building. |
| BuildingTypeId | The building type element. |
| Category | Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element.) |
| CoreOffset | The default offset used to determine the outer perimeter to be divided into zones. |
| CreateAnalyticalModel | If this is true, data, features, and geometry related to the Energy Analytical Model will be created, allowing the energy performance to be analyzed through GreenBuilidingXML. |
| CreatedPhaseId | Id of a Phase at which the Element was created. (Inherited from Element.) |
| DemolishedPhaseId | Id of a Phase at which the Element was demolished. (Inherited from Element.) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element.) |
| DividePerimeter | If this is true, zones with exterior boundaries on each floor of the building will be divided based on geometric criteria. |
| Document | Returns the Document in which the Element resides. (Inherited from Element.) |
| EnergyModel | if this is on there should be an energy model dependent on the current AnalysisType if it is off the conceptual energy model should be turned off but setting this datum does not do the work, just reflects the state. |
| ExportCategory | Value is a category indicating which discipline model will be used for GreenBuildingXML export. |
| ExportComplexity | Value determines Export Complexity for GreenBuildingXML detailed model export. |
| ExportDefaults | Use for detailed model GreenBuildingXML export. When this setting is true, all building and space defaults, schedules, and constructions will be exported to GreenBuildingXML. When this setting is false, only values that are specified on the zone or space will be exported to GreenBuildingXML. |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element.) |
| GroundPlane | Id of level which represents ground level. |
| GroupId | The id of the group to which an element belongs. (Inherited from Element.) |
| Id | A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element.) |
| IncludeThermalProperties | Indicates if thermal information from model assemblies and components is included in GreenBuildingXML export of the detailed model. |
| IsExportMullionsEnabled | Indicates if mullions are included in GreenBuildingXML export of the detailed model. |
| IsExportShadingSurfacesEnabled | Indicates if "shading surfaces" are included in GreenBuildingXML export of the detailed model. |
| IsExportSimplifiedCurtainSystemsEnabled | Indicates if curtain system geometry is being simplified for GreenBuildingXML export of the detailed model. |
| IsGlazingShaded | If this is true, glazing/windows that are auto-created on exterior walls will automatically have a shading device created on their top edge. |
| IsModifiable | Identifies if the element is modifiable. (Inherited from Element.) |
| IsTransient | Indicates whether an element is transient or permanent. (Inherited from Element.) |
| IsValidObject | Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element.) |
| LevelId | The id of the level associated with the element. (Inherited from Element.) |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element.) |
| Name | A human readable name for the Element. (Inherited from Element.) |
| OutsideAirChangesRatePerHour | The number of times the volume of air interchanges in the room in one hour. |
| OutsideAirPerArea | The rate of flow of outside air available per unit area. |
| OutsideAirPerPerson | The rate of flow of outside air available per person. |
| OwnerViewId | The id of the view that owns the element. (Inherited from Element.) |
| ParameterGuid | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element.) |
| ParameterBuiltInParameter | Retrieves a parameter from the element given a parameter id. (Inherited from Element.) |
| ParameterDefinition | Retrieves a parameter from the element based on its definition. (Inherited from Element.) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element.) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element.) |
| PercentageGlazing | Used for the conceptual energy model. The approximate percentage of the building exterior wall surfaces which are covered by windows or other glazing. |
| PercentageSkylights | Used for the conceptual energy model. The approximate percentage of the building roof surfaces in massing instances for the Conceptual Energy Analytical Model. |
| Pinned | Identifies if the element has been pinned to prevent changes. (Inherited from Element.) |
| ProjectPhase | The project phase of the EnergyData information. |
| ProjectReportType | Report type: None, simple, standard, detailed |
| ReportsFolder | The folder path where all systems analysis reports are stored. It may include special label and relative path. |
| ServiceType | The type of heating or cooling system. |
| ShadeDepth | Used for the conceptual energy model. Amount that auto-generated shading will extend from auto-generated windows. |
| SillHeight | Used for the conceptual energy model. The height from the nearest lower level used for auto-glazing created on walls. |
| SkylightWidth | Used for the conceptual energy model. The approximate width used for the skylights in massing instances when the Energy Analytical model is being created. |
| SliverSpaceTolerance | Used for Detailed GreenBuildingXML export. This value is used to identify sliver spaces, i.e. spaces bounded by parallel surfaces belonging to different rooms. |
| UniqueId | A stable unique identifier for an element within the document. (Inherited from Element.) |
| UseAirChangesPerHour | True if user is specifying air changes per hour, false otherwise. |
| UseCurrentViewOnly | True if only elements visible in the currently active view are used for generation of Energy Model. |
| UseHeatingCredits | If true, Revit will use heating credits in the final load sum calculations. If false, Revit will ignore heating credits in the final load sum calculations. |
| UseOutsideAirPerArea | True is user is specifying outside air per area, false otherwise. |
| UseOutsideAirPerPerson | True if user is specifying outside air per person, false otherwise. |
| VersionGuid | Get the element version Guid. (Inherited from Element.) |
| ViewSpecific | Identifies if the element is owned by a view. (Inherited from Element.) |
| WorksetId | Get Id of the Workset which owns the element. (Inherited from Element.) |