BuiltInFailures.RebarCouplerFailures Members


Provides a container of all Revit built-in FailureDefinitionId instances.

The BuiltInFailuresRebarCouplerFailures type exposes the following members.

Properties

  NameDescription
Public propertyStatic memberCantKeepConstraintsToBars
The constraints between the coupler and the two connected bars are no longer satisfied. Post error to delete the coupler.
Public propertyStatic memberCouplerRequiredRemoveFromGroup
The coupler is invalid in group.
Public propertyStatic memberCouplerTypeInvalid
This coupler type does not fit on the selected bar(s). Post error to delete the coupler.
Public propertyStatic memberDisconnectElements
Disconnect the coupler from the connected bar.
Public propertyStatic memberDistanceBetweenBarsError
This is used to post error. The distance between the connected ends of the bars exceeds 10 bar diameters.
Public propertyStatic memberDistanceBetweenBarsWarning
This is used to post warning. The distance between the connected ends of the bars exceeds 10 bar diameters.
Public propertyStatic memberEngagementBiggerThanLengthError
This is used to post error. The sum of bar engagements is greater than the total coupler length.
Public propertyStatic memberEngagementBiggerThanLengthWarning
This is used to post warning. The sum of bar engagements is greater than the total coupler length.
Public propertyStatic memberLengthParameterError
This is used to post error. The "Total Length" parameter must be set to a strictly positive value.
Public propertyStatic memberLengthParameterWarning
This is used to post warning. The "Total Length" parameter must be set to a strictly positive value.
Public propertyStatic memberMainEngagementParameterError
This is used to post error. "Bar Engagement 1" has an incorrect value.
Public propertyStatic memberMainEngagementParameterWarning
This is used to post warning. "Bar Engagement 1" has an incorrect value.
Public propertyStatic memberNewCouplerTypeCreated
A new coupler type was automatically created to fit the bar diameters.
Public propertyStatic memberNoBarSizeError
This is used to post error. At least Bar Size 1 or Bar Size 2 should have another value than "None".
Public propertyStatic memberNoBarSizeWarning
This is used to post warning. At least Bar Size 1 or Bar Size 2 should have a value other than "None".
Public propertyStatic memberNoTypeParamsDefinedWarning
The parameters of the default type have no values.
Public propertyStatic memberSecondaryEngagementParameterError
This is used to post error. "Bar Engagement 2" has an incorrect value.
Public propertyStatic memberSecondaryEngagementParameterWarning
This is used to post warning. "Bar Engagement 2" has an incorrect value.
Public propertyStatic memberWidthParameterError
This is used to post error.The "External Diameter" parameter must be set to a strictly positive value.
Public propertyStatic memberWidthParameterWarning
This is used to post warning. The "External Diameter" parameter must be set to a strictly positive value.

See Also