•  

ViewPlan Members

---

ViewPlan Class Methods Properties See Also

The ViewPlan type exposes the following members.

Methods

	Name	Description
	AddFilter	Adds a filter to the view. (Inherited from View.)
	AllowsAnalysisDisplay	Identifies if this view allows display of Analysis results. (Inherited from View.)
	ApplyViewTemplateParameters	Applies to this view the parameters of the input view that are not controlled by the current view template. (Inherited from View.)
	AreGraphicsOverridesAllowed	Determines if Visibility/Graphics Overriddes can be applied to the view. (Inherited from View.)
	ArePhasesModifiable	Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element. (Inherited from Element.)
	CanApplyColorFillScheme	Checks if the id can be applied as the scheme id of specified category to this view. (Inherited from View.)
	CanBeHidden	Indicates if the element can be hidden in the view. (Inherited from Element.)
	CanBeLocked	Identifies if the element can be locked. (Inherited from Element.)
	CanCategoryBeHidden	Checks whether the category can be hidden in the view. (Inherited from View.)
	CanCategoryBeHiddenTemporary	Check if category can be temporarily hidden in the view. (Inherited from View.)
	CanDeleteSubelement	Checks if given subelement can be removed from the element. (Inherited from Element.)
	CanEnableTemporaryViewPropertiesMode	Indicates if Temporary View Properties mode can be applied for view in current state. (Inherited from View.)
	CanHaveTypeAssigned	Identifies if the element can have a type assigned. (Inherited from Element.)
	CanModifyDetailLevel	Check if Detail Level can be modified. (Inherited from View.)
	CanModifyDisplayStyle	Indicates if DisplayStyle can be modified. (Inherited from View.)
	CanModifyViewDiscipline	Indicates if the View Discipline can be modified (Inherited from View.)
	CanUseDepthCueing	Indicates if view can use Depth Cueing (Inherited from View.)
	CanUseTemporaryVisibilityModes	Indicates if view can use temporary visibility modes (Inherited from View.)
	CanViewBeDuplicated	Identifies if this view can be duplicated. (Inherited from View.)
	ChangeTypeId(ElementId)	Changes the type of the element. (Inherited from Element.)
	CheckPlanViewRangeValidity	Checks if the plan view range is valid.
	ConvertTemporaryHideIsolateToPermanent	Convert all temporary hidden elements or categories to permanently hidden in view. (Inherited from View.)
	ConvertToIndependent	Convert the dependent view to independent. (Inherited from View.)
	Create	Creates a new ViewPlan.
	CreateAreaPlan	Creates a new area plan ViewPlan.
	CreateViewTemplate	Creates a new view template instance from this view instance. (Inherited from View.)
	DeleteEntity	Deletes the existing entity created by %schema% in the element (Inherited from Element.)
	DeleteSubelement	Removes a subelement from the element. (Inherited from Element.)
	DeleteSubelements	Removes the subelements from the element. (Inherited from Element.)
	DisableTemporaryViewMode	Disables the specified temporary view mode. (Inherited from View.)
	Dispose	(Inherited from Element.)
	Duplicate	Duplicates this view. (Inherited from View.)
	EnableRevealHiddenMode	Enables Reveal Hidden elements mode. (Inherited from View.)
	EnableTemporaryViewPropertiesMode	Turns Temporary View Properties mode on or off. In this mode, any changes made to the view are temporary and will be discarded once the mode is disabled. (Inherited from View.)
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object.)
	EvaluateAllParameterValues	Evaluates all the parameters' values of the element. (Inherited from Element.)
	EvaluateParameterValues	Evaluate the parameters' values of the element on the given parameter ID set. (Inherited from Element.)
	GetBackground	Returns the current background set for the view. (Inherited from View.)
	GetCalloutParentId	Gets ID of the callout parent view. (Inherited from View.)
	GetCategoryHidden	Checks if elements of the given category are set to be invisible (hidden) in this view. (Inherited from View.)
	GetCategoryOverrides	Gets graphic overrides for a category in view. (Inherited from View.)
	GetColorFillSchemeId	Returns id of the color fill scheme element applied to the view. (Inherited from View.)
	GetCropRegionShapeManager	Returns an object for managing view crop region shape. (Inherited from View.)
	GetDependentElements	Get all elements that, from a logical point of view, are the children of this Element. (Inherited from Element.)
	GetDependentViewIds	Get the ids of dependent views. (Inherited from View.)
	GetDepthCueing	Returns the current depth cueing settings for the view. (Inherited from View.)
	GetDirectContext3DHandleOverrides	Returns DirectContext3D handle overrides object for the view. (Inherited from View.)
	GetElementOverrides	Gets graphic overrides for an element in the view. (Inherited from View.)
	GetEntity	Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise. (Inherited from Element.)
	GetEntitySchemaGuids	Returns the Schema guids of any Entities stored in this element. (Inherited from Element.)
	GetExternalFileReference	Gets information pertaining to the external file referenced by the element. (Inherited from Element.)
	GetExternalResourceReference	Gets the ExternalResourceReference associated with a specified external resource type. (Inherited from Element.)
	GetExternalResourceReferenceExpanded	Gets the collection of ExternalResourceReference associated with a specified external resource type. (Inherited from Element.)
	GetExternalResourceReferences	Gets the map of the external resource references referenced by the element. (Inherited from Element.)
	GetExternalResourceReferencesExpanded	Gets the expanded map of the external resource references referenced by the element. (Inherited from Element.)
	GetFilterOverrides	Gets graphic overrides that a filter applies to the view. (Inherited from View.)
	GetFilters	Gets the filters applied to the view. (Inherited from View.)
	GetFilterVisibility	Gets the visibility of the elements associated with a filter. (Inherited from View.)
	GetGeneratingElementIds	Returns the ids of the element(s) that generated the input geometry object. (Inherited from Element.)
	GetGeometryObjectFromReference	Retrieve one geometric primitive contained in the element given a reference. (Inherited from Element.)
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object.)
	GetIsFilterEnabled	Identifies if the filter is enabled in this view. (Inherited from View.)
	GetLinkOverrides	Gets the graphic overrides of a RevitLinkType or RevitLinkInstance in view. (Inherited from View.)
	GetMaterialArea	Gets the area of the material with the given id. (Inherited from Element.)
	GetMaterialIds	Gets the element ids of all materials present in the element. (Inherited from Element.)
	GetMaterialVolume	Gets the volume of the material with the given id. (Inherited from Element.)
	GetModelToProjectionTransforms	Gets the transforms from the model space to the view projection space. (Inherited from View.)
	GetMonitoredLinkElementIds	Provides the link instance IDs when the element is monitoring. (Inherited from Element.)
	GetMonitoredLocalElementIds	Provides the local element IDs when the element is monitoring. (Inherited from Element.)
	GetNonControlledTemplateParameterIds	Returns a list of parameters that are not marked as included when this view is used as a template. (Inherited from View.)
	GetOrderedFilters	Gets the filters applied to the view in the order they are applied. (Inherited from View.)
	GetOrderedParameters	Gets the parameters associated to the element in order. (Inherited from Element.)
	GetParameter	Retrieves a parameter from the element given identifier. (Inherited from Element.)
	GetParameterFormatOptions	Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists. (Inherited from Element.)
	GetParameters	Retrieves the parameters from the element via the given name. (Inherited from Element.)
	GetPhaseStatus	Gets the status of a given element in the input phase (Inherited from Element.)
	GetPlacementOnSheetStatus	Determines if this view placed on a sheet completely or partially. (Inherited from View.)
	GetPointCloudOverrides	Returns point cloud overrides object for the view. (Inherited from View.)
	GetPrimaryViewId	Get the id of the primary view. (Inherited from View.)
	GetReferenceCallouts	Returns element ids of all reference callouts in the view. (Inherited from View.)
	GetReferenceElevations	Returns element ids of all reference elevations in the view. (Inherited from View.)
	GetReferenceSections	Returns element ids of all reference sections in the view. (Inherited from View.)
	GetSketchyLines	Returns the current sketchy lines settings for the view. (Inherited from View.)
	GetSubelements	Returns the collection of element subelements. (Inherited from Element.)
	GetTemplateParameterIds	Returns a list of parameter ids that may be controlled when this view is assigned as a template. (Inherited from View.)
	GetTemporaryViewPropertiesId	When Temporary View Properties mode is in progress it provides view id that overrode settings for current view. Outside Temporary View Properties mode InvalidElementId will be returned. (Inherited from View.)
	GetTemporaryViewPropertiesName	When Temporary View Properties mode is in progress, name of applied template is returned. Outside Temporary View Properties mode, empty string will be returned. (Inherited from View.)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	GetTypeId	Returns the identifier of this element's type. (Inherited from Element.)
	GetUnderlayBaseLevel	Returns the element id of the level that defines the bottom of the underlay range.
	GetUnderlayOrientation	Returns the underlay orientation of this view.
	GetUnderlayTopLevel	Returns the element id of the level that defines the top of the underlay range.
	GetValidTypes	Obtains a set of types that are valid for this element. (Inherited from Element.)
	GetViewDisplayModel	Returns the current view display model settings for the view. (Inherited from View.)
	GetViewRange	Gets the view range.
	GetWorksetVisibility	Returns the visibility settings of a workset for this particular view. (Inherited from View.)
	GetWorksharingDisplayMode	Gets the current worksharing display mode for this view. (Inherited from View.)
	HasDetailLevel	Check if the view has a Detail Level property (Inherited from View.)
	HasDisplayStyle	Indicates if view has a DisplayStyle property (Inherited from View.)
	HasPhases	Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId. (Inherited from Element.)
	HasViewDiscipline	Indicates if the view has a Discipline property (Inherited from View.)
	HasViewTransforms	Returns true if the view reports model space to view projection space transforms. (Inherited from View.)
	HideActiveWorkPlane	Hide the active work plane of the view. (Inherited from View.)
	HideCategoriesTemporary	Set multiple categories to be temporarily hidden in the view. (Inherited from View.)
	HideCategoryTemporary	Set one category to be temporarily hidden in the view. (Inherited from View.)
	HideElements	Sets the elements to be hidden in the view. (Inherited from View.)
	HideElementsTemporary	Set multiple elements to be temporarily hidden in the view. To hide a group completely, you must also include all members of all groups and nested groups in your input. (Inherited from View.)
	HideElementTemporary	Set one element to be temporarily hidden in the view. To hide a group completely, you must also include all members of all groups and nested groups in your input, therefore you should use the version of this method that accepts multiple element ids as input. (Inherited from View.)
	IsCategoryOverridable	Checks whether the category can have graphic overrides in this view. (Inherited from View.)
	IsCreatedPhaseOrderValid	Returns true if createdPhaseId and demolishedPhaseId are in order. (Inherited from Element.)
	IsDemolishedPhaseOrderValid	Returns true if createdPhaseId and demolishedPhaseId are in order. (Inherited from Element.)
	IsElementVisibleInTemporaryViewMode	Identifies if the input element is visible for the temporary view mode for this view. (Inherited from View.)
	IsExternalFileReference	Determines whether this Element represents an external file. (Inherited from Element.)
	IsFilterApplied	Indicates if a filter is applied to the view. (Inherited from View.)
	IsHidden	Identifies if the element has been permanently hidden in the view. (Inherited from Element.)
	IsInTemporaryViewMode	Returns true if the view is in a particular temporary view mode. (Inherited from View.)
	IsMonitoringLinkElement	Indicate whether an element is monitoring any elements in any linked models. (Inherited from Element.)
	IsMonitoringLocalElement	Indicate whether an element is monitoring other local elements. (Inherited from Element.)
	IsolateCategoriesTemporary	Set categories to be temporarily isolated in the view. (Inherited from View.)
	IsolateCategoryTemporary	Set one category to be temporarily isolated in the view. (Inherited from View.)
	IsolateElementsTemporary	Set multiple elements to be temporarily isolated in the view. To isolate a group completely, you must also include all members of all groups and nested groups in your input. (Inherited from View.)
	IsolateElementTemporary	Set one element to be temporarily isolated in the view. To isolate a group completely, you must also include all members of all groups and nested groups in your input, therefore you should use the version of this method that accepts multiple element ids as input. (Inherited from View.)
	IsPhaseCreatedValid	Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element. (Inherited from Element.)
	IsPhaseDemolishedValid	Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element. (Inherited from Element.)
	IsTemporaryHideIsolateActive	Indicates if the view is temporarily hiding or isolating elements or categories. (Inherited from View.)
	IsTemporaryViewPropertiesModeEnabled	Returns true when Temporary View Properties mode is in progress, false otherwise. (Inherited from View.)
	IsValidType(ElementId)	Checks if given type is valid for this element. (Inherited from Element.)
	IsValidViewTemplate	Verifies that the view represented by templateId can be set as the controlling view template for this view. (Inherited from View.)
	IsViewValidForTemplateCreation	Verifies that the view is valid for template creation. (Inherited from View.)
	IsWorksetVisible	Indicates whether the workset is visible in this view. (Inherited from View.)
	LookupParameter	Attempts to find a parameter on the element which has the given name. (Inherited from Element.)
	Print	Print this view with the default view template and using the print setting of the current active document. (Inherited from View.)
	Print(Boolean)	Print this view with the default view template, and either the view's document's print setting or the print setting of the current active document. (Inherited from View.)
	Print(View)	Print this view with the given view template and using the print setting of the current active document. (Inherited from View.)
	Print(View, Boolean)	Print this view with the given view template, and either the view's document's print setting or the print setting of the current active document. (Inherited from View.)
	RefersToExternalResourceReference	Determines whether this Element uses external resources associated with a specified external resource type. (Inherited from Element.)
	RefersToExternalResourceReferences	Determines whether this Element uses external resources. (Inherited from Element.)
	RemoveCalloutParent	Replaces callout parent ID with InvalidElementId. (Inherited from View.)
	RemoveFilter	Removes a filter from the view. (Inherited from View.)
	RemoveLinkOverrides	Deletes the graphical link overrides in the current view. (Inherited from View.)
	RestoreCalloutParent	Restores callout parent ID to the original view ID if that view is still available. (Inherited from View.)
	SetBackground	Sets the background for the view. Background can only be set for 3d views and for Sections/Elevations. (Inherited from View.)
	SetCategoryHidden	Sets if elements of the given category will be visible in this view. (Inherited from View.)
	SetCategoryOverrides	Sets graphic overrides for a category in view. (Inherited from View.)
	SetColorFillSchemeId	Applies color fill scheme to this view. (Inherited from View.)
	SetDepthCueing	Sets the depth cueing settings for the view. (Inherited from View.)
	SetElementOverrides	Sets graphic overrides for an element in the view. (Inherited from View.)
	SetEntity	Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten. (Inherited from Element.)
	SetFilterOverrides	Sets the overrides associated with a filter. (Inherited from View.)
	SetFilterVisibility	Sets the visibility of the elements associated with a filter. (Inherited from View.)
	SetIsFilterEnabled	Sets the filter enabled flag. (Inherited from View.)
	SetLinkOverrides	Sets the graphic overrides of a RevitLinkType or RevitLinkInstance in the view. (Inherited from View.)
	SetNonControlledTemplateParameterIds	Sets the parameters that will not be included when this view is used as a template. (Inherited from View.)
	SetSketchyLines	Sets the sketchy lines settings for the view. (Inherited from View.)
	SetUnderlayBaseLevel	Sets the level whose elevation will determine the bottom of the underlay range. The elevation of the next highest level will be used to determine the top of the underlay range.
	SetUnderlayOrientation	Sets the underlay orientation for this view.
	SetUnderlayRange	Sets the underlay base and underlay top to the specified levels.
	SetViewDisplayModel	Sets the view display model settings for the view. (Inherited from View.)
	SetViewRange	Sets the view range.
	SetWorksetVisibility	Sets visibility for a workset in this view. (Inherited from View.)
	SetWorksharingDisplayMode	Sets the worksharing display mode for this view. (Inherited from View.)
	ShowActiveWorkPlane	Show the active work plane of the view. (Inherited from View.)
	SupportedColorFillCategoryIds	Returns collection of all category ids that correspond to elements that can potentially be colored in this view according to a color fill scheme. The set may be different depending on the view type. (Inherited from View.)
	SupportsRevealConstraints	Checks that the view can have the Reveal Constraints mode activated. (Inherited from View.)
	SupportsWorksharingDisplayMode	Checks whether this view supports the given worksharing display mode. (Inherited from View.)
	ToString	Returns a string that represents the current object. (Inherited from Object.)
	UnhideElements	Sets the elements to be shown in the given view if they are currently hidden. (Inherited from View.)

Properties

	Name	Description
	AnalysisDisplayStyleId	Element id of Analysis Display Style associated with the view. (Inherited from View.)
	AreAnalyticalModelCategoriesHidden	Indicates if analytical model categories are currently hidden in the view. (Inherited from View.)
	AreAnnotationCategoriesHidden	Indicates if annotation categories are currently hidden in the view. (Inherited from View.)
	AreaScheme	The area scheme.
	AreCoordinationModelHandlesHidden	Indicates if Coordination Model handles are currently hidden in the view. (Inherited from View.)
	AreImportCategoriesHidden	Indicates if import categories are currently hidden in the view. (Inherited from View.)
	AreModelCategoriesHidden	Indicates if model categories are currently hidden in the view. (Inherited from View.)
	ArePointCloudsHidden	Indicates if point clouds are currently hidden in the view. (Inherited from View.)
	AssemblyInstanceId	The id of the assembly instance to which the element belongs. (Inherited from Element.)
	AssociatedAssemblyInstanceId	The Id of the assembly instance that owns the assembly view. (Inherited from View.)
	BoundingBox	Retrieves a box that circumscribes all geometry of the element. (Inherited from Element.)
	CanBePrinted	Test whether the view can be printed. (Inherited from View.)
	Category	Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element.)
	CreatedPhaseId	Id of a Phase at which the Element was created. (Inherited from Element.)
	CropBox	The Crop Box applied to the view, or an outline encompassing the crop region applied to the view. (Inherited from View.)
	CropBoxActive	Whether or not the Crop Box/Region is active for the view. (Inherited from View.)
	CropBoxVisible	Whether or not the Crop Box/Region is visible for the view. (Inherited from View.)
	DemolishedPhaseId	Id of a Phase at which the Element was demolished. (Inherited from Element.)
	DesignOption	Returns the design option to which the element belongs. (Inherited from Element.)
	DetailLevel	The detail level of this view. (Inherited from View.)
	Discipline	The Discipline of the view. (Inherited from View.)
	DisplayStyle	The DisplayStyle of the view. Returns DisplayStyle.Wireframe if the view has no display style. (Inherited from View.)
	Document	Returns the Document in which the Element resides. (Inherited from Element.)
	GenLevel	The level for the view. (Inherited from View.)
	Geometry	Retrieves the geometric representation of the element. (Inherited from Element.)
	GroupId	The id of the group to which an element belongs. (Inherited from Element.)
	Id	A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element.)
	IsAssemblyView	Indicates if the view is assembly view. (Inherited from View.)
	IsCallout	Indicates if the view is a callout view. (Inherited from View.)
	IsModifiable	Identifies if the element is modifiable. (Inherited from Element.)
	IsTemplate	Test whether the view is a view template. (Inherited from View.)
	IsTransient	Indicates whether an element is transient or permanent. (Inherited from Element.)
	IsValidObject	Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element.)
	LevelId	The id of the level associated with the element. (Inherited from Element.)
	Location	This property is used to find the physical location of an element within a project. (Inherited from Element.)
	Name	A human readable name for the Element. (Inherited from Element.)
	Origin	Returns the origin of the screen. (Inherited from View.)
	Outline	The bounds of the view in paper space (in feet). (Inherited from View.)
	OwnerViewId	The id of the view that owns the element. (Inherited from Element.)
	ParameterGuid	Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element.)
	ParameterBuiltInParameter	Retrieves a parameter from the element given a parameter id. (Inherited from Element.)
	ParameterDefinition	Retrieves a parameter from the element based on its definition. (Inherited from Element.)
	Parameters	Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element.)
	ParametersMap	Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element.)
	PartsVisibility	The visibility setting for parts in this view. (Inherited from View.)
	Pinned	Identifies if the element has been pinned to prevent changes. (Inherited from Element.)
	RevealConstraintsMode	Indicates whether the Reveal Constraints mode is activated in the view. (Inherited from View.)
	RightDirection	The direction towards the right side of the screen. (Inherited from View.)
	Scale	The scale of the view. (Inherited from View.)
	ShadowIntensity	The intesity of cast shadows - 0 = no shadows, 100 = black. (Inherited from View.)
	SketchPlane	The sketch plane assigned to the view for model curve creation. (Inherited from View.)
	SunAndShadowSettings	The sun and shadow settings assigned to the view for shadow calculation and rendering. (Inherited from View.)
	SunlightIntensity	The intensity of the simulated (directional) sunlight. 0 = no directional light; maximum value is 100. (Inherited from View.)
	TemporaryViewModes	Data of temporary view modes associated with this view. (Inherited from View.)
	Title	The view title. This consists of the view name plus other modifiers, such as the view type, sheet number, area scheme, and/or assembly type, depending on the specifics of the view. (Inherited from View.)
	UniqueId	A stable unique identifier for an element within the document. (Inherited from Element.)
	UpDirection	The direction towards the top of the screen. (Inherited from View.)
	VersionGuid	Get the element version Guid. (Inherited from Element.)
	ViewDirection	The direction towards the viewer. (Inherited from View.)
	ViewSpecific	Identifies if the element is owned by a view. (Inherited from Element.)
	ViewTemplateId	The id of the template view that controls this view's parameters. (Inherited from View.)
	ViewType	The type of the view. (Inherited from View.)
	WorksetId	Get Id of the Workset which owns the element. (Inherited from Element.)

See Also

ViewPlan Class

Autodesk.Revit.DB Namespace