The Document type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
 | Dispose | Causes the object to release immediately any resources it may be utilizing. (Inherited from APIObject.) |
| Equals | Determines whether the specified Object is equal to the current Object. (Inherited from Object.) |
| GetHashCode | Serves as a hash function for a particular type. (Inherited from Object.) |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| NewAlignment | Add a new locked alignment into the Autodesk Revit document. (Inherited from ItemFactoryBase.) |
| NewArea | Creates a new area |
| NewAreaBoundaryConditions(Element, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double) | Creates a new Area BoundaryConditions element on a host element. |
| NewAreaBoundaryConditions(Reference, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double) | Creates a new Area BoundaryConditions element on a reference. |
| NewAreaBoundaryLine | Creates a new boundary line as an Area border. |
| NewAreas | Creates new areas |
| NewAreaTag | Creates a new area tag. |
| NewCrossFitting | Add a new family instance of a cross fitting into the Autodesk Revit document, using four connectors. |
| NewCurtainSystem | Creates a new CurtainSystem element from a set of faces. |
| NewCurtainSystem2 | Creates a new CurtainSystem element from a set of face references. |
| NewDetailCurve | Creates a new detail curve element. (Inherited from ItemFactoryBase.) |
| NewDetailCurveArray | Creates an array of new detail curve elements. (Inherited from ItemFactoryBase.) |
| NewDimension(View, Line, ReferenceArray) | Creates a new linear dimension object using the default dimension style. (Inherited from ItemFactoryBase.) |
| NewDimension(View, Line, ReferenceArray, DimensionType) | Creates a new linear dimension object using the specified dimension style. (Inherited from ItemFactoryBase.) |
| NewElbowFitting | Add a new family instance of an elbow fitting into the Autodesk Revit document, using two connectors. |
| NewExtrusionRoof | Creates a new Extrusion Roof. |
| NewFamilyInstance(Face, Line, FamilySymbol) | Inserts a new instance of a family onto a face of an existing element, using a line on that face for its position, and a type/symbol. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(Line, FamilySymbol, View) | Add a line based detail family instance into the Autodesk Revit document, using an line and a view where the instance should be placed. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(Reference, Line, FamilySymbol) | Inserts a new instance of a family onto a face referenced by the input Reference instance, using a line on that face for its position, and a type/symbol. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(XYZ, FamilySymbol, StructuralType) | Inserts a new instance of a family into the document, using a location and a type/symbol. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(XYZ, FamilySymbol, View) | Add a new family instance into the Autodesk Revit document, using an origin and a view where the instance should be placed. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(Curve, FamilySymbol, Level, StructuralType) | Inserts a new instance of a family into the document, using a curve, type/symbol and reference level. |
| NewFamilyInstance(Face, XYZ, XYZ, FamilySymbol) | Inserts a new instance of a family onto a face of an existing element, using a location, reference direction, and a type/symbol. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(Reference, XYZ, XYZ, FamilySymbol) | Inserts a new instance of a family onto a face referenced by the input Reference instance, using a location, reference direction, and a type/symbol. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(XYZ, FamilySymbol, Element, StructuralType) | Inserts a new instance of a family into the document, using a location, type/symbol, and the host element. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(XYZ, FamilySymbol, Level, StructuralType) | Inserts a new instance of a family into the document, using a location, type/symbol, and the level. (Inherited from ItemFactoryBase.) |
| NewFamilyInstance(XYZ, FamilySymbol, Element, Level, StructuralType) | Inserts a new instance of a family into the document, using a location, type/symbol, the host element and a base level. |
| NewFamilyInstance(XYZ, FamilySymbol, XYZ, Element, StructuralType) | Inserts a new instance of a family into the document, using a location, type/symbol, the host element and a reference direction. (Inherited from ItemFactoryBase.) |
| NewFamilyInstances2 | Creates Family instances within the document. (Inherited from ItemFactoryBase.) |
| NewFascia(FasciaType, Reference) | Creates a fascia along a reference. |
| NewFascia(FasciaType, ReferenceArray) | Creates a fascia along a reference array. |
| NewFlexDuct(IListXYZ, FlexDuctType) | Adds a new flexible duct into the document, using a point array and duct type. |
| NewFlexDuct(Connector, Connector, FlexDuctType) | Adds a new flexible duct into the document, using two connector, and duct type. |
| NewFlexDuct(Connector, IListXYZ, FlexDuctType) | Adds a new flexible duct into the document, using a connector, point array and duct type. |
| NewFlexPipe(IListXYZ, FlexPipeType) | Adds a new flexible pipe into the document, using a point array and pipe type. |
| NewFlexPipe(Connector, Connector, FlexPipeType) | Adds a new flexible pipe into the document, using two connector, and flexible pipe type. |
| NewFlexPipe(Connector, IListXYZ, FlexPipeType) | Adds a new flexible pipe into the document, using a connector, point array and pipe type. |
| NewFootPrintRoof | Creates a new FootPrintRoof element. |
| NewGroup | Creates a new type of group. (Inherited from ItemFactoryBase.) |
| NewGutter(GutterType, Reference) | Creates a gutter along a reference. |
| NewGutter(GutterType, ReferenceArray) | Creates a gutter along a reference array. |
| NewLineBoundaryConditions(Element, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double) | Creates a new Line BoundaryConditions element on a host element. |
| NewLineBoundaryConditions(Reference, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double, TranslationRotationValue, Double) | Creates a new Line BoundaryConditions element on a reference. |
| NewMechanicalSystem | Creates a new MEP mechanical system element. |
| NewModelCurve | Creates a new model line element. (Inherited from ItemFactoryBase.) |
| NewModelCurveArray | Creates an array of new model line elements. (Inherited from ItemFactoryBase.) |
| NewOpening(Element, CurveArray, eRefFace) | Creates a new opening in a beam, brace and column. |
| NewOpening(Element, CurveArray, Boolean) | Creates a new opening in a roof, floor and ceiling. |
| NewOpening(Level, Level, CurveArray) | Creates a new shaft opening between a set of levels. |
| NewOpening(Wall, XYZ, XYZ) | Creates a rectangular opening on a wall. |
| NewPipingSystem | Creates a new MEP piping system element. |
| NewPointBoundaryConditions | Creates a new Point BoundaryConditions Element. |
| NewReferencePlane | Creates a new instance of ReferencePlane. (Inherited from ItemFactoryBase.) |
| NewReferencePlane2 | Creates a new instance of ReferencePlane. (Inherited from ItemFactoryBase.) |
| NewRoom(Phase) | Creates a new unplaced room and with an assigned phase. |
| NewRoom(Level, UV) | Creates a new room on a level at a specified point. |
| NewRoom(Room, PlanCircuit) | Creates a new room within the confines of a plan circuit, or places an unplaced room within the confines of the plan circuit. |
| NewRoomBoundaryLines | Creates a new boundary line as an Room border. |
| NewRooms2(Level) | Creates new rooms in each plan circuit found in the given level in the last phase. |
| NewRooms2(Level, Phase) | Creates new rooms in each plan circuit found in the given level in the given phase. |
| NewRooms2(Phase, Int32) | Creates new unplaced rooms in the given phase. |
| NewRoomTag | Creates a new RoomTag referencing a room in the host model or in a Revit link. |
| NewSlabEdge(SlabEdgeType, Reference) | Creates a slab edge along a reference. |
| NewSlabEdge(SlabEdgeType, ReferenceArray) | Creates a slab edge along a reference array. |
| NewSpace(Phase) | Creates a new unplaced space on a given phase. |
| NewSpace(Level, UV) | Creates a new space element on the given level at the given location. |
| NewSpace(Level, Phase, UV) | Creates a new space element on the given level, at the given location, and assigned to the given phase. |
| NewSpaceBoundaryLines | Creates a new boundary line as an Space border. |
| NewSpaces2(Phase, Int32) | Creates a set of new unplaced spaces on a given phase. |
| NewSpaces2(Level, Phase, View) | Creates new spaces on the available plan circuits of a the given level. |
| NewSpaceTag | Creates a new SpaceTag. |
| NewSpotCoordinate | Generate a new spot coordinate object within the project. |
| NewSpotElevation | Generate a new spot elevation object within the project. |
| NewTakeoffFitting | Add a new family instance of an takeoff fitting into the Autodesk Revit document, using one connector and one MEP curve. |
| NewTeeFitting | Add a new family instance of a tee fitting into the Autodesk Revit document, using three connectors. |
| NewTransitionFitting | Add a new family instance of an transition fitting into the Autodesk Revit document, using two connectors. |
| NewUnionFitting | Add a new family instance of an union fitting into the Autodesk Revit document, using two connectors. |
| NewZone | Creates a new Zone element. |
| PlaceGroup | Place an instance of a Model Group into the Autodesk Revit document, using a location and a group type. (Inherited from ItemFactoryBase.) |
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
Properties
| Name | Description | |
|---|---|---|
 | IsReadOnly | Identifies if the object is read-only or modifiable. (Inherited from APIObject.) |