•  

BuiltInFailures.FabricFailures Class

Built In Failures Fabric Failures Class

Failures about Fabric.
Inheritance Hierarchy
System Object
Autodesk.Revit.DB BuiltInFailures FabricFailures

Namespace: Autodesk.Revit.DB
Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)
Syntax 
public static class FabricFailures

The BuiltInFailures FabricFailures type exposes the following members.

Properties
Name Description
Public property Static member BendDiameterNegative Fabric Bend Diameter is negative.
Public property Static member BendPolylineInvalid The bend profile contains too short of a segment to apply the wire bend diameter. Cannot create a bent fabric sheet for this type.
Public property Static member BentHiddenWires The wires of this custom fabric sheet type are longer than the bending sketch. The linear quantities shown in schedules and tags are not accurate.
Public property Static member CannotPlaceFabricArea Can't find a host for Fabric Area.
Public property Static member CannotPlaceFabricAreaWarn Can't find a host for Fabric Area.
Public property Static member CannotPlaceFabricSheet Can't find a host for Fabric Sheet.
Public property Static member CannotPlaceFabricSheetWarn Can't find a host for Fabric Sheet.
Public property Static member CoverOffsetTooLong Cover offset is greater than host thickness.
Public property Static member CoverOffsetTooLongTemp Cover offset is greater than host thickness - support for transient Single Fabric Sheet in editor.
Public property Static member FabricAreaWrongHost Fabric Area can be placed only in Structural Floors and straight Structural Walls.
Public property Static member FabricAreaWrongLapSplice Fabric Area Sheet lap splice is incorrect. Can't create Fabric Area.
Public property Static member FabricAreaWrongSheetAlignment Fabric Area Sheet Alignment is incorrect. Can't create Fabric Area.
Public property Static member FabricSheetWrongHost Fabric Sheet can be placed only in Structural Floors and straight Structural Walls.
Public property Static member MajorLapSpliceFailure The lap splice in the major direction is greater than the half of the overall length.
Public property Static member MajorOverhangFailure At least one of the overhangs in the major direction is lower than radius of the wire in the minor direction.
Public property Static member MajorSpacingFailure The spacing in the major direction is lower than diameter of the wire in the minor direction.
Public property Static member MinorLapSpliceFailure The lap splice in the minor direction is greater than the half of the overall width.
Public property Static member MinorOverhangFailure At least one of the overhangs in the minor direction is lower than radius of the wire in the major direction.
Public property Static member MinorSpacingFailure The spacing in the minor direction is lower than diameter of the wire in the major direction.
Public property Static member NoSurfPatternOnWire Wire elements do not support surface patterns. The surface pattern associated with this material will not be displayed on the indicated Fabric Sheet Type.
Public property Static member NoWireMaterialDensity Material does not have a density defined. The weight of the Fabric Sheet cannot be computed.
Public property Static member WireDiameterTooLarge Fabric Wire Diameter is too large.
Public property Static member WrongFabricSheetEndOverhang Wrong Start Overhang of the Fabric Sheet Type.
Public property Static member WrongFabricSheetLayoutPattern The Layout Pattern cannot accommodate the current data. Try decreasing the Number of Wires/Spacing.
Public property Static member WrongFabricSheetNumberOfWires Wrong Number of Wires of the Fabric Sheet Type.
Public property Static member WrongFabricSheetOverallLength Wrong Overall Length/Width of the Fabric Sheet Type.
Public property Static member WrongFabricSheetSpacing Wrong Spacing of the Fabric Sheet Type.
Public property Static member WrongFabricSheetStartOverhang Wrong Start Overhang of the Fabric Sheet Type.
Top
See Also