•  

BuiltInFailures.AutoRouteFailures Class

Built In Failures Auto Route Failures Class

Failures about AutoRoute.
Inheritance Hierarchy
System Object
Autodesk.Revit.DB BuiltInFailures AutoRouteFailures

Namespace: Autodesk.Revit.DB
Assembly: RevitAPI (in RevitAPI.dll) Version: 26.0.4.0 (26.0.4.0)
Syntax 
public static class AutoRouteFailures

The BuiltInFailures AutoRouteFailures type exposes the following members.

Properties
Name Description
Public property Static member AttemptToConnectNonSlopingElementToSlopedPipeError You have specified that sloped pipe be drawn, but are trying to connect to an element that doesn't support sloping connections.
Public property Static member AttemptToConnectNonSlopingElementToSlopedPipeWarning You have specified that sloped pipe be drawn, but are trying to connect to an element that doesn't support sloping connections.
Public property Static member DesignOptionConflictError The solution is failing to do the elements are not in the same Design Option.
Public property Static member DesignOptionConflictWarning The solution is failing to do the elements are not in the same Design Option.
Public property Static member DistributionTypeInvalid Selected distribution system type is invalid!
Public property Static member ElementHasFlowCalculation This element has an open connection. This may not be an error, but for flow calculations to work correctly all connections should be sealed with an end cap.
Public property Static member ElementHasOpenConnection This element has an open connection. This may not be an error, but all open connections should be sealed with an end cap.
Public property Static member FailedDowngradeCrossToElbow Failed to downgrade tee type to elbow type.
Public property Static member FailedDowngradeCrossToTee Failed to downgrade cross type to tee type.
Public property Static member FailedDowngradeTeeToCross Failed to upgrade tee type to cross type.
Public property Static member FailToDoCompatiblePhaseError The solution is failing to do the elements Phases are compatible.
Public property Static member FailToDoCompatiblePhaseWarning The solution is failing to do the elements Phases are compatible.
Public property Static member FailToIntersectParallelSegmentsError The solution is failing to do segments which are parallel and should intersect.
Public property Static member FailToIntersectParallelSegmentsWarning The solution is failing to do segments which are parallel and should intersect.
Public property Static member FamilySymbolNestingElementsError The fitting family contains unsupported nested elements or sub-elements. Please update the routing preference by selecting a different fitting type.
Public property Static member FittingParamsCauseGeometryToFailError The one of parameters for the fitting is causing the geometry to fail.
Public property Static member FittingParamsCauseGeometryToFailWarning The one of parameters for the fitting is causing the geometry to fail.
Public property Static member HighlightedElementDisconnected The highlighted element has been disconnected.
Public property Static member InappropriateSlopeForPipe The slope that you specified could not be applied to this pipe. Please check the items that it is connected to and make sure that they aren't constraining the slope of them.
Public property Static member MismatchedSystemClassificationHasSystemWarning The selected fixture is part of a system with different classification. System calculations (e.g. flow analysis) are not possible between systems with different classifications.
Public property Static member MismatchedSystemClassificationNoSystemWarning The selected fixture is assigned to a system with different classification.
Public property Static member MismatchedSystemTypeWarning The selected fixture is part of a different system. You may want to edit the system type and merge two systems.
Public property Static member NoAutoRouteSolutionFoundError No auto-route solution was found.
Public property Static member NoAutoRouteSolutionFoundWarning No auto-route solution was found.
Public property Static member NoFittingInProjectError The routing solution failed because there is no default fitting type specified or the fitting cannot be found in the project. Ensure the fitting is loaded in the project and try again.
Public property Static member NoFittingInProjectWarning The routing solution failed because there is no default fitting type specified or the fitting cannot be found in the project. Ensure the fitting is loaded in the project and try again.
Public property Static member NoFittingInRoutingError The fitting that is converted to was not defined. Please assign one in the routing preference.
Public property Static member NoFittingLoadedInProjectError The fitting that is converted to was not defined. Please load one fitting family and assign it in the routing preference.
Public property Static member NoSolutionInView There is no solution for this view. All the elements have been filtered for this view, select another view, and select solutions.
Public property Static member NotAllPartsWereConvertedCannotAddPlaceholderWarning Not all parts were converted. Placeholders could not be added to fill the gap (the gap was too small). Check the fabrication service definition for the system.
Public property Static member NotAllPartsWereConvertedPlaceholdersWereAddedWarning Not all parts were converted. Placeholders were added to fill the gaps. Check the fabrication service definition for the system.
Public property Static member NotEnoughRoomForFittingsError There was not enough room to place the required fittings. Consider increasing the length of the segments, or moving them farther apart to generate a solution.
Public property Static member NotEnoughRoomForFittingsWarning There was not enough room to place the required fittings. Consider increasing the length of the segments, or moving them farther apart to generate a solution.
Public property Static member NoValidSolutionAtSelectedPoint No valid auto-route solution at selected point.
Public property Static member OverrideFabricationPartFailed The fabrication part cannot be overridden. The button code you specified does not match the fabrication service. Please specify a different button code or check the fabrication service and try again.
Public property Static member SegmentDrawnFromWrongSideError The segment is being drawn from the wrong side to connect to the location you indicated.
Public property Static member SegmentDrawnFromWrongSideWarning The segment is being drawn from the wrong side to connect to the location you indicated.
Public property Static member SegmentsAngleTooGreatError The resulting angle between the segments is too great.
Public property Static member SegmentsAngleTooGreatWarning The resulting angle between the segments is too great.
Public property Static member SolutionIsOppositeToConnectionError The solution is in the opposite direction of the connection direction.
Public property Static member SolutionIsOppositeToConnectionWarning The solution is in the opposite direction of the connection direction.
Public property Static member SpecifiedAnglesNotCompatibleWithLayoutError The specified angles are not compatible with current layout.
Public property Static member SpecifiedAnglesNotCompatibleWithLayoutWarning The specified angles are not compatible with current layout.
Public property Static member UnableToMakeConnectionInDirection The application is unable to make a connection in that direction. If the connectors are pointing up, make sure that the elevations of the segments (ducts and pipes) are above them. If the connectors are pointing down, make sure that the elevations of the segments (ducts and pipes) are below them.
Public property Static member UtilizationCoefficientOutOfRange The value for Coefficient of Utilization must be between 0 and 1.
Public property Static member ZeroLengthSegmentError The solution is failing to do segments which are zero length.
Public property Static member ZeroLengthSegmentWarning The solution is failing to do segments which are zero length.
Top
See Also