Built In Failures Rebar System Failures Class

Failures related to rebar systems.

Inheritance Hierarchy

System Object
Autodesk.Revit.DB BuiltInFailures RebarSystemFailures

Namespace: Autodesk.Revit.DB
Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)

Syntax

public static class RebarSystemFailures

Public NotInheritable Class RebarSystemFailures

public ref class RebarSystemFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type RebarSystemFailures = class end

The BuiltInFailures RebarSystemFailures type exposes the following members.

Properties

	Name	Description
	AreaReinforcementOutSideOfHost	Area Reinforcement is sketched completely outside of its host.
	AreaReinforcementRegenFail	Can't regenerate Area Reinforcement.
	AreaReinforcementsCollision	Area Reinforcements are colliding. Aligning the Major Directions, or changing the Additional Offsets, can prevent collision.
	AreaReinforcementWrongHost	Area Reinforcement can be placed only in Structural Floors and straight Structural Walls.
	BarsTooCloseNumber	Bars are too close together. Decrease the Number Of Lines parameter.
	BarsTooCloseSpacing	Bars are too close together. Increase the Maximum Spacing parameter.
	BarsTooSparseSpacing	Bar spacing is greater than the size of the reinforced region. Decrease the Maximum Spacing parameter.
	CannotPlaceAreaReinforcement	Can't find a host for Area Reinforcement.
	CannotPlaceAreaReinforcementWarn	Can't find a host for Area Reinforcement.
	CannotPlaceAreaReininforcement	Can't find a host for Area Reinforcement.
	CannotPlaceAreaReininforcementWarn	Can't find a host for Area Reinforcement.
	CannotPlacePathReinforcement	Can't find a host for Path Reinforcement.
	CannotPlacePathReinforcementWarn	Can't find a host for Path Reinforcement.
	CannotPlacePathReininforcement	Can't find a host for Path Reinforcement.
	CannotPlacePathReininforcementWarn	Can't find a host for Path Reinforcement.
	CannotUseAreaReinforcementHookTypeStyle	At least one of the bars in the Area Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles.
	CannotUsePathReinforcementHookTypeStyle	At least one of the bars in the Path Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles.
	DPartReinfDeletedEditDivision	Edits to the model will cause some Reinforcement hosted on Parts to be deleted.
	DPartReinforcementDeleted	Reinforcement hosted on highlighted Parts will be deleted.
	HostFlagAreaOff
	HostFlagAreaOn	The Area Reinforcement element was created in a document with the Host Structural Rebar setting on, and cannot be transferred into this document, which has the setting off.
	HostFlagPathOff
	HostFlagPathOn
	InvalidLapSpliceInAreaReinforcement	The instance major/minor lap lengths must be smaller than 1/2 of the overall length from the type in major and minor directions, respectively. The default values set for this parameters did not respect this criteria so they were automatically reset to the type values.
	LessThanTwoBars	Each reinforcement direction requires at least 2 bars. Please increase the number of bars.
	PathReinforcementWrongHost	Path Reinforcement can be placed only in Structural Floors and straight Structural Walls.
	RebarSystemOffset	Rebar Cover Side/Edge is too large for sketch. Bar placement may be inaccurate.
	ThinHostFloor	Rebar Cover Top and Bottom are too large for host.
	ThinHostFloorError	Rebar Cover Top and Bottom are too large for host.
	ThinHostWall	Rebar Cover Interior and Exterior are too large for host.
	ThinHostWallError	Rebar Cover Interior and Exterior are too large for host.

Top

Reference

Autodesk.Revit.DB Namespace

BuiltInFailures.RebarSystemFailures Class

Built In Failures Rebar System Failures Class

Reference