Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.

Indicates if the element can be hidden in the view.

Identifies if the element can be locked.

Indicates whether the Element can have an Analytical Model.

Identifies if the element can have a type assigned.

Changes the type of the element.

Checks that the analysis type falls within an appropriate range.

Checks that the building construction class falls within an appropriate range.

Checks that the building envelope determination method falls within an appropriate range.

Checks that the building HVAC system falls within an appropriate range.

Checks that the building operating schedule falls within an appropriate range.

Checks that the building type falls within an appropriate range.

Checks that the construction set ElementId is acceptable.

Checks whether the export category falls within the list:

1. OST_Rooms
2. OST_MEPSpaces

Checks that the export complexity falls within an appropriate range.

The ground plane should be an Element of type Level. This method checks to confirm that an ElementId is for a Level element.

The ground plane should be an Element of type Level. This method checks to confirm that an ElementId is for a Level element.

Checks that the input element is a project phase.

Checks that the project report type falls within an appropriate range.

Checks that the mass zone core offset is greater than or equal to zero.

Checks that the percentage glazing value is between 0.00 and 0.95.

Checks that the percentage skylights value is between 0.00 and 0.95.

Checks that the shade depth is greater than or equal to zero.

Checks that the sill height is greater than or equal to zero.

Checks that the skylight width is greater than or equal to eight inches.

Checks that the sliver space tolerance is greater than or equal to zero.

Checks that the service type falls within an appropriate range.

Deletes the existing entity created by %schema% in the element

Turns on functionality related to conceptual energy analysis.

Determines whether the specified Object is equal to the current Object .

Retrieves writeable Analytical Model for Element.

Retrieves the Element Id of the Analytical Model Element for this Element.

Id of the building construction set.

Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.

Returns the Schema guids of any Entities stored in this element.

Gets information pertaining to the external file referenced by the element.

Gets the ExternalResourceReference associated with a specified external resource type.

Gets the full map of the external resource references referenced by the element.

Every project document has a EnergyDataSettings element. Family documents do not have EnergyDataSettings elements.

Returns the ids of the element(s) that generated the input geometry object.

Retrieve one geometric primitive contained in the element given a reference.

Serves as a hash function for a particular type.

Gets the area of the material with the given id.

Gets the element ids of all materials present in the element.

Gets the volume of the material with the given id.

Provides the link instance IDs when the element is monitoring.

Provides the local element IDs when the element is monitoring.

Gets the parameters associated to the element in order.

Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.

Retrieves the parameters from the element via the given name.

Gets the status of a given element in the input phase

Gets the Type of the current instance.

Returns the identifier of this element's type.

Obtains a set of types that are valid for this element.

Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.

Get EnergyDataSettings element and if it exists, return result from getCreateAnalyticalModel.

Determines whether this Element represents an external file.

Identifies if the element has been permanently hidden in the view.

Indicate whether an element is monitoring any elements in any linked models.

Indicate whether an element is monitoring other local elements.

Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.

Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.

Checks if given type is valid for this element.

Attempts to find a parameter on the element which has the given name.

Determines whether this Element uses external resources associated with a specified external resource type.

Determines whether this Element uses external resources.

If this is true, data, features, and geometry related to the Energy Analytical Model will be created, allowing the energy performance to be analyzed through GreenBuilidingXML.

Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.

Returns a string that represents the current object.

The type of analysis mode.

The cell size for the uniform cubical grid used when computing the building envelope

The id of the assembly instance to which the element belongs.

Retrieves a box that circumscribes all geometry of the element.

Used for both the detailed and conceptual energy model Construction class of building as defined by: loose, medium, tight, or none.

Indicates if an analysis should be perform to find the model elements that are part of the building envelope

The type of HVAC system used by the building for conceptual model energy calculations.

The operating schedule of the building used for conceptual model energy calculations.

The type of building.

Retrieves a Category object that represents the category or sub category in which the element resides.

The default offset used to determine the outer perimeter to be divided into zones.

If this is true, data, features, and geometry related to the Energy Analytical Model will be created, allowing the energy performance to be analyzed through GreenBuilidingXML.

Id of a Phase at which the Element was created.

Id of a Phase at which the Element was demolished.

Returns the design option to which the element belongs.

If this is true, zones with exterior boundaries on each floor of the building will be divided based on geometric criteria.

Returns the Document in which the Element resides.

if this is on there should be an energy model dependent on the current AnalysisType if it is off the conceptual energy model should be turned off but setting this datum does not do the work, just reflects the state.

Value is a category indicating which discipline model will be used for GreenBuildingXML export.

Value determines Export Complexity for GreenBuildingXML detailed model export.

Use for detailed model GreenBuildingXML export. When this setting is true, all building and space defaults, schedules, and constructions will be exported to GreenBuildingXML. When this setting is false, only values that are specified on the zone or space will be exported to GreenBuildingXML.

Retrieves the geometric representation of the element.

Id of level which represents ground level.

The id of the group to which an element belongs.

A unique identifier for an Element in an Autodesk Revit project.

Indicates if thermal information from model assemblies and components is included in GreenBuildingXML export of the detailed model.

Indicates if mullions are included in GreenBuildingXML export of the detailed model.

Indicates if "shading surfaces" are included in GreenBuildingXML export of the detailed model.

Indicates if curtain system geometry is being simplified for GreenBuildingXML export of the detailed model.

If this is true, glazing/windows that are auto-created on exterior walls will automatically have a shading device created on their top edge.

Indicates whether an element is transient or permanent.

Specifies whether the .NET object represents a valid Revit entity.

The id of the level associated with the element.

This property is used to find the physical location of an element within a project.

It defines the default behavior for the automatic generation of Mass Zones for each Mass Floor in the Project. Specifying a value here will offset the outside perimeter of a Mass Zone to create the core.

If this is true, outward facing zones on each floor of the building will be divided based on the four compass directions.

A human readable name for the Element.

The number of times the volume of air interchanges in the room in one hour.

The rate of flow of outside air available per unit area.

The rate of flow of outside air available per person.

The id of the view that owns the element.

Retrieves a parameter from the element given a GUID for a shared parameter.

Retrieves a parameter from the element given a parameter id.

Retrieves a parameter from the element based on its definition.

Retrieves a set containing all of the parameters that are contained within the element.

Retrieves a map containing all of the parameters that are contained within the element.

Used for the conceptual energy model. The approximate percentage of the building exterior wall surfaces which are covered by windows or other glazing.

Used for the conceptual energy model. The approximate percentage of the building roof surfaces in massing instances for the Conceptual Energy Analytical Model.

Identifies if the element has been pinned to prevent changes.

The project phase of the EnergyData information.

Report type: None, simple, standard, detailed

The type of heating or cooling system.

Used for the conceptual energy model. Amount that auto-generated shading will extend from auto-generated windows.

Used for the conceptual energy model. The height from the nearest lower level used for auto-glazing created on walls.

Used for the conceptual energy model. The approximate width used for the skylights in massing instances when the Energy Analytical model is being created.

Used for Detailed GreenBuildingXML export. This value is used to identify sliver spaces, i.e. spaces bounded by parallel surfaces belonging to different rooms.

A stable unique identifier for an element within the document.

True if user is specifying air changes per hour, false otherwise.

If true, Revit will use heating credits in the final load sum calculations. If false, Revit will ignore heating credits in the final load sum calculations.

True is user is specifying outside air per area, false otherwise.

True if user is specifying outside air per person, false otherwise.

Identifies if the element is owned by a view.

Get Id of the Workset which owns the element.