Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures ConnectorFailures type exposes the following members.
Properties
Name | Description | |
---|---|---|
AirTerminalCenterNotAligned |
The center of the Air Terminal doesn't align at (0,0,0): align the Air Terminal Center to the Origin Defining Reference Planes could help to solve the problem.
|
|
AllElementsRemovedFromCircuitGroup |
[System] is empty and will be deleted.
|
|
DisconnectedElements |
Elements are disconnected!
|
|
ElementAssignedToDefaultSystem |
At least one connector on the highlighted element is currently assigned to the [Element Name]. In general items shouldn't be assigned to the Default Systems, but should be assigned as equipments or elements of a non-default system. Click the More Info button below for additional information on System Creation.
|
|
ElementsAreDisconnected |
Elements need to be disconnected.
|
|
ElementsConnectedToParent |
You have selected elements that are connected to a parent object in a System. These elements cannot be removed from the System.
|
|
ElementsNeedToBeDisconnected |
Elements need to be disconnected.
|
|
ExistsForSelectedElement |
Connections already exists for selected element.
|
|
FittingMustBeOnDuct |
The [Tap] must be attached to duct.
|
|
FittingMustBeOnDuctWarn |
The [Tap] must be attached to duct.
|
|
FittingMustBeOnPipe |
The [Tap] must be attached to pipe.
|
|
FittingMustBeOnPipeWarn |
The [Tap] must be attached to pipe.
|
|
InvalidConnectionRef |
The selected fitting has invalid connections and must be deleted to continue.
|
|
InvalidConnector |
The connector is invalid, the size cannot be determined from the connector.
|
|
InvalidLoadClassificationValue |
The load classification parameter cannot be empty. Please select a valid load classification element for the connector parameter and the associated family parameter.
|
|
InvalidPowerFactorValue |
The value for Power Factor must be between 0 and 1.
|
|
JointGenderMismatch |
The element has a connector with a fitting joint gender mismatch
|
|
JointShapeMismatch |
The element has a connector with a fitting joint shape mismatch
|
|
JointSizeMismatch |
The element has a connector with a fitting joint size mismatch
|
|
JointTypeMismatch |
The element has a connector with a fitting joint type mismatch
|
|
LayoutConnector |
[Unassigned System Type] on Connector [Index Number].
|
|
MismatchNoAvailableConnector |
Cannot add [Element] to System. There is no available connector matching the System Type ([Type Name]) for the System.
|
|
MultipleNetwork |
Elements in [System Name] are not connected in a single physical network due to one or both of the following:\n- There are disconnects in the system's physical network.\n- Elements in the system are connected to more than one physical network.
|
|
NetworkValidityError |
The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
|
|
NetworkValidityErrorWasDisconnected |
The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
|
|
NoLossDefined |
No Loss Defined
|
|
NoSupportKCoefficientTable |
"K Coefficient from table" is not supported on connector for the element
|
|
NotAllowedToModifyGroupElementsError |
Connection to a group failed. Modification of elements within a group is not allowed.
|
|
NotAllowedToModifyGroupElementsWarning |
Connection to a group failed. Modification of elements within a group is not allowed.
|
|
OpenConnector |
The element has an open connector
|
|
RbsNetworkValidityError |
The family is connected in a network and can no longer keep the connectivity.
|
|
RemoveConnectorLinksWarn |
The links between connector [Index] and connector [Index], connector [Index] and connector [Index] are removed.
|
|
RemoveConnectorLinkWarn |
The link between connector [Index] and connector [Index] is removed.
|
|
ShapesNotMatch |
Shapes do not match. A connection could not be made.
|
|
SizingCalculationFlowOnlyWarn |
Some elements are not sized because the system calculation is flow only. You may change the system calculation level to size them again.
|
|
SizingCalculationNoneWarn |
Some elements are not sized because the system calculation level is none or performance. You may change the system calculation level to size them again.
|
|
SizingFailed |
Sizing failed.
|
|
UnconnectedCircuit |
The element has an unconnected circuit on its connector
|
|
UnconnectedDevice |
Device has an unconnected [Type Name] connector (index = [Index Number]).
|
|
UndefinedConnector |
Revit does not support Undefined connectors. The following have been replaced by the default connector: [Connector Element]
|