Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures AnalyticalModelFailures type exposes the following members.
Properties
Name | Description | |
---|---|---|
AdjustCurveTooShort |
AdjustCurve is too short.
|
|
AdjustEdgeTooShort |
AdjustEdge is too short.
|
|
AdjustEdgeTooShortErr |
AdjustEdge is too short - continuable error version.
|
|
AdjustEdgeTooShortWarn |
AdjustEdge is too short.
|
|
AnalyticalBeamSlabWarning |
Beam and Slab Analytical Models do not have the same Analytical Projection Plane.
|
|
AnalyticalDiscrepancyWarning |
Distance between Analytical and Physical Models of Structural Element is beyond tolerance of [Value]
|
|
AnalyticalGapWarning |
Detected physical connection between Structural Elements, but did not detect Analytical intersection.
|
|
AnalyticalLinkJoinedNodes |
Analitycal Link is invalid. Reference nodes have been joined.
|
|
AnalyticalLinkNotConnected |
Analytical Link has lost one or more references.
|
|
AnalyticalMemberInstability |
Possible Member Instability, based on Release Conditions
|
|
AnalyticalModelInstability |
Possible Model Instability
|
|
AnalyticalModelIsIncorrect |
Analytical Model is not created for the structural element.
|
|
AnalyticalPhysicalCheckDone |
Analytical / Physical Model Consistency check is complete.
|
|
AnalyticalSupportCycleWarning |
Circular support chain detected
|
|
AnalyticalTopBottomPlanesReversed |
Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset
top and/or bottom planes to valid values.
|
|
AutoDetectIgnoreLeaderWarning |
Analytical Model for Structural Element has reset to its default location.
|
|
BoundaryLinesIntersect |
Boundary lines intersect.
|
|
CannotCreateAnalyticalGeometry |
Cannot construct Analytical Geometry.
|
|
CannotKeepAnalyticalAdjustment |
Analytical model Adjustment distance exceeds current Adjustment Snapping Distance. To adjust snap settings, go to the Structural Settings Dialog.
|
|
CannotMakeAnalyticalGeometry |
Cannot construct Analytical Geometry.
|
|
LoadsMayBeNotUpToDate |
Reactions defined as Internal Load (Is Reaction) may no longer be valid since the analytical model has changed.
|
|
ProjectionPlaneInvalidWall |
Projection plane becomes invalid for this wall.
|
|
ProjectionPlanesNotIntersect |
Can't project Analytical Model. Planes do not intersect each other.
|
|
ProjectionPlanesParallel |
Can't project Analytical Model. Two or more projection planes are parallel.
|
|
StructAnalyticalErrorProjection |
Can't project Analytical Model to Analytical Projection Surface
|
|
StructuralElementMayNotBeSupported |
Structural Element may not be supported -- verify support for Element.
|
|
StructWallAnalyticalErrorAlign |
Can't align Analytical Model with joined Walls.
|
|
StructWallAnalyticalErrorConversion |
Can't convert Edges to Analytical Model curves.
|
|
SupportCheckDone |
Member support check is complete. No unsupported elements detected.
|
|
WallAMLostAdjustmentReference |
Wall Analytical Model has lost its adjustment reference.
|