Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures AnalyticalModelFailures type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | AdjustCurveTooShort | AdjustCurve is too short. |
| | AdjustEdgeTooShort | AdjustEdge is too short. |
| | AdjustEdgeTooShortErr | AdjustEdge is too short - continuable error version. |
| | AdjustEdgeTooShortWarn | AdjustEdge is too short. |
| | AnalyticalBeamSlabWarning | Beam and Slab Analytical Models do not have the same Analytical Projection Plane. |
| | AnalyticalDiscrepancyWarning | Distance between Analytical and Physical Models of Structural Element is beyond tolerance of [Value] |
| | AnalyticalGapWarning | Detected physical connection between Structural Elements, but did not detect Analytical intersection. |
| | AnalyticalLinkJoinedNodes | Analitycal Link is invalid. Reference nodes have been joined. |
| | AnalyticalLinkNotConnected | Analytical Link has lost one or more references. |
| | AnalyticalMemberInstability | Possible Member Instability, based on Release Conditions |
| | AnalyticalModelInstability | Possible Model Instability |
| | AnalyticalModelIsIncorrect | Analytical Model is not created for the structural element. |
| | AnalyticalPhysicalCheckDone | Analytical / Physical Model Consistency check is complete. |
| | AnalyticalSupportCycleWarning | Circular support chain detected |
| | AnalyticalTopBottomPlanesReversed | Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values. |
| | AutoDetectIgnoreLeaderWarning | Analytical Model for Structural Element has reset to its default location. |
| | BoundaryLinesIntersect | Boundary lines intersect. |
| | CannotCreateAnalyticalGeometry | Cannot construct Analytical Geometry. |
| | CannotKeepAnalyticalAdjustment | Analytical model Adjustment distance exceeds current Adjustment Snapping Distance. To adjust snap settings, go to the Structural Settings Dialog. |
| | CannotMakeAnalyticalGeometry | Cannot construct Analytical Geometry. |
| | LoadsMayBeNotUpToDate | Reactions defined as Internal Load (Is Reaction) may no longer be valid since the analytical model has changed. |
| | ProjectionPlaneInvalidWall | Projection plane becomes invalid for this wall. |
| | ProjectionPlanesNotIntersect | Can't project Analytical Model. Planes do not intersect each other. |
| | ProjectionPlanesParallel | Can't project Analytical Model. Two or more projection planes are parallel. |
| | StructAnalyticalErrorProjection | Can't project Analytical Model to Analytical Projection Surface |
| | StructuralElementMayNotBeSupported | Structural Element may not be supported -- verify support for Element. |
| | StructWallAnalyticalErrorAlign | Can't align Analytical Model with joined Walls. |
| | StructWallAnalyticalErrorConversion | Can't convert Edges to Analytical Model curves. |
| | SupportCheckDone | Member support check is complete. No unsupported elements detected. |
| | WallAMLostAdjustmentReference | Wall Analytical Model has lost its adjustment reference. |