Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures RebarSystemFailures type exposes the following members.
Properties
Name | Description | |
---|---|---|
AreaReinforcementOutSideOfHost |
Area Reinforcement is sketched completely outside of its host.
|
|
AreaReinforcementRegenFail |
Can't regenerate Area Reinforcement.
|
|
AreaReinforcementsCollision |
Area Reinforcements are colliding. Aligning the Major Directions, or changing the Additional Offsets, can prevent collision.
|
|
AreaReinforcementWrongHost |
Area Reinforcement can be placed only in Structural Floors and straight Structural Walls.
|
|
BarsTooCloseNumber |
Bars are too close together. Decrease the Number Of Lines parameter.
|
|
BarsTooCloseSpacing |
Bars are too close together. Increase the Maximum Spacing parameter.
|
|
BarsTooSparseSpacing |
Bar spacing is greater than the size of the reinforced region. Decrease the Maximum Spacing parameter.
|
|
CannotPlaceAreaReinforcement |
Can't find a host for Area Reinforcement.
|
|
CannotPlaceAreaReinforcementWarn |
Can't find a host for Area Reinforcement.
|
|
CannotPlaceAreaReininforcement |
Can't find a host for Area Reinforcement.
|
|
CannotPlaceAreaReininforcementWarn |
Can't find a host for Area Reinforcement.
|
|
CannotPlacePathReinforcement |
Can't find a host for Path Reinforcement.
|
|
CannotPlacePathReinforcementWarn |
Can't find a host for Path Reinforcement.
|
|
CannotPlacePathReininforcement |
Can't find a host for Path Reinforcement.
|
|
CannotPlacePathReininforcementWarn |
Can't find a host for Path Reinforcement.
|
|
CannotUseAreaReinforcementHookTypeStyle |
At least one of the bars in the Area Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles.
|
|
CannotUsePathReinforcementHookTypeStyle |
At least one of the bars in the Path Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles.
|
|
DPartReinfDeletedEditDivision |
Edits to the model will cause some Reinforcement hosted on Parts to be deleted.
|
|
DPartReinforcementDeleted |
Reinforcement hosted on highlighted Parts will be deleted.
|
|
HostFlagAreaOff | ||
HostFlagAreaOn |
The Area Reinforcement element was created in a document with the Host Structural Rebar setting on, and cannot be transferred into this document, which has the setting off.
|
|
HostFlagPathOff | ||
HostFlagPathOn | ||
LessThanTwoBars |
Each reinforcement direction requires at least 2 bars. Please increase the number of bars.
|
|
PathReinforcementWrongHost |
Path Reinforcement can be placed only in Structural Floors and straight Structural Walls.
|
|
RebarSystemOffset |
Rebar Cover Side/Edge is too large for sketch. Bar placement may be inaccurate.
|
|
ThinHostFloor |
Rebar Cover Top and Bottom are too large for host.
|
|
ThinHostFloorError |
Rebar Cover Top and Bottom are too large for host.
|
|
ThinHostWall |
Rebar Cover Interior and Exterior are too large for host.
|
|
ThinHostWallError |
Rebar Cover Interior and Exterior are too large for host.
|