Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailuresRebarSystemFailures type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | AreaReinforcementOutSideOfHost | Area Reinforcement is sketched completely outside of its host. |
| AreaReinforcementRegenFail | Can't regenerate Area Reinforcement. |
| AreaReinforcementsCollision | Area Reinforcements are colliding. Aligning the Major Directions, or changing the Additional Offsets, can prevent collision. |
| AreaReinforcementWrongHost | Area Reinforcement can be placed only in Structural Floors and straight Structural Walls. |
| BarsTooCloseNumber | Bars are too close together. Decrease the Number Of Lines parameter. |
| BarsTooCloseSpacing | Bars are too close together. Increase the Maximum Spacing parameter. |
| BarsTooSparseSpacing | Bar spacing is greater than the size of the reinforced region. Decrease the Maximum Spacing parameter. |
| CannotPlaceAreaReinforcement | Can't find a host for Area Reinforcement. |
| CannotPlaceAreaReinforcementWarn | Can't find a host for Area Reinforcement. |
| CannotPlaceAreaReininforcement | Can't find a host for Area Reinforcement. |
| CannotPlaceAreaReininforcementWarn | Can't find a host for Area Reinforcement. |
| CannotPlacePathReinforcement | Can't find a host for Path Reinforcement. |
| CannotPlacePathReinforcementWarn | Can't find a host for Path Reinforcement. |
| CannotPlacePathReininforcement | Can't find a host for Path Reinforcement. |
| CannotPlacePathReininforcementWarn | Can't find a host for Path Reinforcement. |
| CannotUseAreaReinforcementHookTypeStyle | At least one of the bars in the Area Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles. |
| CannotUsePathReinforcementHookTypeStyle | At least one of the bars in the Path Reinforcement has a Bar Type or Shape that is incompatible with the Hook type. Check the Hook permissions for the Bar Type (see Hook Lengths) and the Hook and Rebar Shape styles. |
| DPartReinfDeletedEditDivision | Edits to the model will cause some Reinforcement hosted on Parts to be deleted. |
| DPartReinforcementDeleted | Reinforcement hosted on highlighted Parts will be deleted. |
| HostFlagAreaOff | |
| HostFlagAreaOn | The Area Reinforcement element was created in a document with the Host Structural Rebar setting on, and cannot be transferred into this document, which has the setting off. |
| HostFlagPathOff | |
| HostFlagPathOn | |
| LessThanTwoBars | Each reinforcement direction requires at least 2 bars. Please increase the number of bars. |
| PathReinforcementWrongHost | Path Reinforcement can be placed only in Structural Floors and straight Structural Walls. |
| RebarSystemOffset | Rebar Cover Side/Edge is too large for sketch. Bar placement may be inaccurate. |
| ThinHostFloor | Rebar Cover Top and Bottom are too large for host. |
| ThinHostFloorError | Rebar Cover Top and Bottom are too large for host. |
| ThinHostWall | Rebar Cover Interior and Exterior are too large for host. |
| ThinHostWallError | Rebar Cover Interior and Exterior are too large for host. |