The Zone type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | Area | Get the Area of the Zone. |
| AssemblyInstanceId | The id of the assembly instance to which the element belongs. (Inherited from Element.) |
| Boundary | Returns the boundary of the Zone. |
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element.) |
| CalculatedCoolingLoad | Get the Calculated Cooling Load of the Zone. |
| CalculatedHeatingLoad | Get the Calculated Heating Load of the Zone. |
| CalculatedSupplyAirflow | Get the Calculated Supply Airflow of the Zone. |
| Category | Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element.) |
| CoolingAirTemperature | Get or set the Cooling Air Temperature of the Zone. |
| CoolingSetPoint | Get or set the Cooling Set Point of the Zone. |
| CreatedPhaseId | Id of a Phase at which the Element was created. (Inherited from Element.) |
| DehumidificationSetPoint | Get or set the DeHumidification Set Point of the Zone. |
| DemolishedPhaseId | Id of a Phase at which the Element was demolished. (Inherited from Element.) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element.) |
| Document | Returns the Document in which the Element resides. (Inherited from Element.) |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element.) |
| GrossArea | Get the Gross Area of the Zone. |
| GrossVolume | Get the Gross Volume of the Zone. |
| GroupId | The id of the group to which an element belongs. (Inherited from Element.) |
| HeatingAirTemperature | Get or set the Heating Air Temperature of the Zone. |
| HeatingSetPoint | Get or set the Heating Set Point of the Zone. |
| HumidificationSetPoint | Get or set the Humidification Set Point of the Zone. |
| Id | A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element.) |
| IsDefaultZone | Reports whether this zone is default or not. |
| IsModifiable | Identifies if the element is modifiable. (Inherited from Element.) |
| IsTransient | Indicates whether an element is transient or permanent. (Inherited from Element.) |
| IsValidObject | Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element.) |
| LevelId | The id of the level associated with the element. (Inherited from Element.) |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element.) |
| Name | Get or Set the Name of the Zone. (Overrides ElementName.) |
| OwnerViewId | The id of the view that owns the element. (Inherited from Element.) |
| ParameterGuid | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element.) |
| ParameterBuiltInParameter | Retrieves a parameter from the element given a parameter id. (Inherited from Element.) |
| ParameterDefinition | Retrieves a parameter from the element based on its definition. (Inherited from Element.) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element.) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element.) |
| Perimeter | Get the Perimeter of the Zone. |
| Phase | Get the Phase of the Zone. |
| Pinned | Identifies if the element has been pinned to prevent changes. (Inherited from Element.) |
| ServiceType | Get or set the Service Type of the Zone. |
| Spaces | Get the Spaces of the Zone. |
| UniqueId | A stable unique identifier for an element within the document. (Inherited from Element.) |
| VersionGuid | Get the element version Guid. (Inherited from Element.) |
| ViewSpecific | Identifies if the element is owned by a view. (Inherited from Element.) |
| Volume | Get the Volume of the Zone. |
| WorksetId | Get Id of the Workset which owns the element. (Inherited from Element.) |