•  

Zone Properties

---

Zone Properties

The Zone type exposes the following members.

Properties

	Name	Description
	Area	Get the Area of the Zone.
	AssemblyInstanceId	The id of the assembly instance to which the element belongs. (Inherited from Element )
	Boundary	Returns the boundary of the Zone.
	BoundingBox	Retrieves a box that circumscribes all geometry of the element. (Inherited from Element )
	CalculatedCoolingLoad	Obsolete. Get the Calculated Cooling Load of the Zone.
	CalculatedHeatingLoad	Obsolete. Get the Calculated Heating Load of the Zone.
	CalculatedSupplyAirflow	Obsolete. Get the Calculated Supply Airflow of the Zone.
	Category	Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element )
	CoolingAirTemperature	Obsolete. Get or set the Cooling Air Temperature of the Zone.
	CoolingSetPoint	Obsolete. Get or set the Cooling Set Point of the Zone.
	CreatedPhaseId	Id of a Phase at which the Element was created. (Inherited from Element )
	DehumidificationSetPoint	Obsolete. Get or set the DeHumidification Set Point of the Zone.
	DemolishedPhaseId	Id of a Phase at which the Element was demolished. (Inherited from Element )
	DesignOption	Returns the design option to which the element belongs. (Inherited from Element )
	Document	Returns the Document in which the Element resides. (Inherited from Element )
	Geometry	Retrieves the geometric representation of the element. (Inherited from Element )
	GrossArea	Obsolete. Get the Gross Area of the Zone.
	GrossVolume	Obsolete. Get the Gross Volume of the Zone.
	GroupId	The id of the group to which an element belongs. (Inherited from Element )
	HeatingAirTemperature	Obsolete. Get or set the Heating Air Temperature of the Zone.
	HeatingSetPoint	Obsolete. Get or set the Heating Set Point of the Zone.
	HumidificationSetPoint	Obsolete. Get or set the Humidification Set Point of the Zone.
	Id	A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element )
	IsDefaultZone	Obsolete. Reports whether this zone is default or not.
	IsModifiable	Identifies if the element is modifiable. (Inherited from Element )
	IsTransient	Indicates whether an element is transient or permanent. (Inherited from Element )
	IsValidObject	Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element )
	LevelId	The id of the level associated with the element. (Inherited from Element )
	Location	This property is used to find the physical location of an element within a project. (Inherited from Element )
	Name	Get or Set the Name of the Zone. (Overrides Element Name )
	OwnerViewId	The id of the view that owns the element. (Inherited from Element )
	Parameter BuiltInParameter	Retrieves a parameter from the element given a parameter id. (Inherited from Element )
	Parameter Definition	Retrieves a parameter from the element based on its definition. (Inherited from Element )
	Parameter Guid	Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element )
	Parameters	Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element )
	ParametersMap	Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element )
	Perimeter	Obsolete. Get the Perimeter of the Zone.
	Phase	Get the Phase of the Zone.
	Pinned	Identifies if the element has been pinned to prevent changes. (Inherited from Element )
	ServiceType	Obsolete. Get or set the Service Type of the Zone.
	Spaces	Get the Spaces of the Zone.
	UniqueId	A stable unique identifier for an element within the document. (Inherited from Element )
	VersionGuid	Get the element version Guid. (Inherited from Element )
	ViewSpecific	Identifies if the element is owned by a view. (Inherited from Element )
	Volume	Obsolete. Get the Volume of the Zone.
	WorksetId	Get Id of the Workset which owns the element. (Inherited from Element )

Top

See Also

Reference

Zone Class

Autodesk.Revit.DB.Mechanical Namespace