Wire Members


The Wire type exposes the following members.

Methods

Name Description
Public method AppendVertex
Appends one vertex to the end of the wire.
Public method ArePhasesModifiable
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from Element .)
Public method Static member AreVertexPointsValid
Checks if the given vertex points are valid for the wire.
Public method CanBeHidden
Indicates if the element can be hidden in the view.
(Inherited from Element .)
Public method CanBeLocked
Identifies if the element can be locked.
(Inherited from Element .)
Public method CanDeleteSubelement
Checks if given subelement can be removed from the element.
(Inherited from Element .)
Public method CanHaveAnalyticalModel
Indicates whether the Element can have an Analytical Model.
(Inherited from Element .)
Public method CanHaveTypeAssigned
Identifies if the element can have a type assigned.
(Inherited from Element .)
Public method ChangeTypeId(ElementId)
Changes the type of the element.
(Inherited from Element .)
Public method ConnectTo
Connects the wire to other elements.
Public method Static member Create
Creates a new wire.
Public method DeleteEntity
Deletes the existing entity created by %schema% in the element
(Inherited from Element .)
Public method DeleteSubelement
Removes a subelement from the element.
(Inherited from Element .)
Public method DeleteSubelements
Removes the subelements from the element.
(Inherited from Element .)
Public method Dispose (Inherited from Element .)
Public method Equals
Determines whether the specified Object is equal to the current Object .
(Inherited from Object .)
Public method FindInserts
Gets the ids of the instances inserted into this host object.
(Inherited from HostObject .)
Public method GetAnalyticalModel
Retrieves writeable Analytical Model for Element.
(Inherited from Element .)
Public method GetAnalyticalModelId
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from Element .)
Public method GetEntity
Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.
(Inherited from Element .)
Public method GetEntitySchemaGuids
Returns the Schema guids of any Entities stored in this element.
(Inherited from Element .)
Public method GetExternalFileReference
Gets information pertaining to the external file referenced by the element.
(Inherited from Element .)
Public method GetExternalResourceReference
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from Element .)
Public method GetExternalResourceReferences
Gets the full map of the external resource references referenced by the element.
(Inherited from Element .)
Public method GetGeneratingElementIds
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from Element .)
Public method GetGeometryObjectFromReference
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from Element .)
Public method GetHashCode
Serves as a hash function for a particular type.
(Inherited from Object .)
Public method GetMaterialArea
Gets the area of the material with the given id.
(Inherited from Element .)
Public method GetMaterialIds
Gets the element ids of all materials present in the element.
(Inherited from Element .)
Public method GetMaterialVolume
Gets the volume of the material with the given id.
(Inherited from Element .)
Public method GetMEPSystems
Gets the systems to which the wire belongs.
Public method GetMonitoredLinkElementIds
Provides the link instance IDs when the element is monitoring.
(Inherited from Element .)
Public method GetMonitoredLocalElementIds
Provides the local element IDs when the element is monitoring.
(Inherited from Element .)
Public method GetOrderedParameters
Gets the parameters associated to the element in order.
(Inherited from Element .)
Public method GetParameterFormatOptions
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from Element .)
Public method GetParameters
Retrieves the parameters from the element via the given name.
(Inherited from Element .)
Public method GetPhaseStatus
Gets the status of a given element in the input phase
(Inherited from Element .)
Public method GetSubelements
Returns the collection of element subelements.
(Inherited from Element .)
Public method GetType
Gets the Type of the current instance.
(Inherited from Object .)
Public method GetTypeId
Returns the identifier of this element's type.
(Inherited from Element .)
Public method GetValidTypes
Obtains a set of types that are valid for this element.
(Inherited from Element .)
Public method GetVertex
Gets the position of an existing vertex.
Public method HasPhases
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from Element .)
Public method InsertVertex
Inserts a new vertex before the specified index.
Public method IsExternalFileReference
Determines whether this Element represents an external file.
(Inherited from Element .)
Public method IsHidden
Identifies if the element has been permanently hidden in the view.
(Inherited from Element .)
Public method IsMonitoringLinkElement
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from Element .)
Public method IsMonitoringLocalElement
Indicate whether an element is monitoring other local elements.
(Inherited from Element .)
Public method IsPhaseCreatedValid
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from Element .)
Public method IsPhaseDemolishedValid
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from Element .)
Public method IsValidType(ElementId)
Checks if given type is valid for this element.
(Inherited from Element .)
Public method IsVertexPointValid
Checks if the given vertex point can be added to this wire.
Public method LookupParameter
Attempts to find a parameter on the element which has the given name.
(Inherited from Element .)
Public method RefersToExternalResourceReference
Determines whether this Element uses external resources associated with a specified external resource type.
(Inherited from Element .)
Public method RefersToExternalResourceReferences
Determines whether this Element uses external resources.
(Inherited from Element .)
Public method RemoveVertex
Removes the vertex corresponding to the specified index. Can not remove the start or end vertex if it already connects to other element.
Public method SetEntity
Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.
(Inherited from Element .)
Public method SetVertex
Sets the position of a given vertex. If the vertex is start or end point, and the wire connects to electrical device, the wire end offset will be set according to the given vertex. If the vertex is start or end point, and the wire connects to other wire, user can't set the vertex and exception will be thrown. If the vertex is start or end point, and the wire connects to nothing, the vertex will be set as the given vertex.
Public method ToString
Returns a string that represents the current object.
(Inherited from Object .)

Properties

Name Description
Public property AssemblyInstanceId
The id of the assembly instance to which the element belongs.
(Inherited from Element .)
Public property BoundingBox
Retrieves a box that circumscribes all geometry of the element.
(Inherited from Element .)
Public property Category
Retrieves a Category object that represents the category or sub category in which the element resides.
(Inherited from Element .)
Public property ConnectorManager
The connector manager of this MEP curve.
(Inherited from MEPCurve .)
Public property CreatedPhaseId
Id of a Phase at which the Element was created.
(Inherited from Element .)
Public property DemolishedPhaseId
Id of a Phase at which the Element was demolished.
(Inherited from Element .)
Public property DesignOption
Returns the design option to which the element belongs.
(Inherited from Element .)
Public property Diameter
The diameter of the MEP curve.
(Inherited from MEPCurve .)
Public property Document
Returns the Document in which the Element resides.
(Inherited from Element .)
Public property Geometry
Retrieves the geometric representation of the element.
(Inherited from Element .)
Public property GroundConductorNum
The ground conductor number. Its default value is zero after created.
Public property GroupId
The id of the group to which an element belongs.
(Inherited from Element .)
Public property Height
The height of the MEP curve.
(Inherited from MEPCurve .)
Public property HotConductorNum
The hot conductor number. Its default value is zero after created.
Public property Id
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element .)
Public property IsTransient
Indicates whether an element is transient or permanent.
(Inherited from Element .)
Public property IsValidObject
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element .)
Public property LevelId
The id of the level associated with the element.
(Inherited from Element .)
Public property LevelOffset
The offset of the MEP curve.
(Inherited from MEPCurve .)
Public property Location
This property is used to find the physical location of an element within a project.
(Inherited from Element .)
Public property MEPSystem
The system of the MEP curve.
(Inherited from MEPCurve .)
Public property Name
A human readable name for the Element.
(Inherited from Element .)
Public property NeutralConductorNum
The neutral conductor number. Its default value is zero after created.
Public property NumberOfVertices
The number of vertices of the wire, including the start and end point.
Public property OwnerViewId
The id of the view that owns the element.
(Inherited from Element .)
Public property Parameter Guid
Retrieves a parameter from the element given a GUID for a shared parameter.
(Inherited from Element .)
Public property Parameter BuiltInParameter
Retrieves a parameter from the element given a parameter id.
(Inherited from Element .)
Public property Parameter Definition
Retrieves a parameter from the element based on its definition.
(Inherited from Element .)
Public property Parameters
Retrieves a set containing all of the parameters that are contained within the element.
(Inherited from Element .)
Public property ParametersMap
Retrieves a map containing all of the parameters that are contained within the element.
(Inherited from Element .)
Public property Pinned
Identifies if the element has been pinned to prevent changes.
(Inherited from Element .)
Public property ReferenceLevel
The reference level of the MEP curve.
(Inherited from MEPCurve .)
Public property UniqueId
A stable unique identifier for an element within the document.
(Inherited from Element .)
Public property ViewSpecific
Identifies if the element is owned by a view.
(Inherited from Element .)
Public property Width
The width of the MEP curve.
(Inherited from MEPCurve .)
Public property WiringType
The wiring type(arc or chamfer) for the wire.
Public property WorksetId
Get Id of the Workset which owns the element.
(Inherited from Element .)

See Also